BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277478BTC
Διαθέσιμο
NEMIX RAM
NEMIX RAM 192GB (4×48GB) DDR5 5600 CL46 1.1V 2Rx8 UDIMM Supermicro BH4SRG memory upgrade
A 192 GB DDR5 kit of four 48 GB unbuffered UDIMMs running at 5600 MT/s with CL46 latency and 1.1 V operation, validated for the Supermicro BH4SRG motherboard
- Capacity192GB (4 x 48GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 192 GB total capacity from four 48 GB modules
- DDR5 5600 speed rated at PC5-44800 bandwidth
- CL46 CAS latency for responsive timing
- 1 V operating voltage for efficient power draw
- Validated for Supermicro BH4SRG motherboard compatibility
System-specific DDR5 kit for Supermicro BH4SRG
This 192GB kit contains four 48GB unbuffered UDIMMs built for the Supermicro BH4SRG motherboard. It targets administrators and power users who need maximum memory capacity in a supported configuration. Each module runs at 5600 MT/s with CL46 latency at 1.1V.
Four 288-pin slots populated with 2Rx8 modules
The kit fills four DIMM slots with dual-rank 2Rx8 organisation, leaving no empty slots for further expansion on this board. No heat spreaders are fitted, so airflow across the modules must come from case or CPU cooling. Installation follows standard UDIMM procedure without registration or ECC overhead.
Steady 5600 MT/s throughput at 1.1V under load
Rated voltage of 1.10V and CL46 timings are maintained during sustained workloads typical of virtualisation or large dataset processing. The 2Rx8 density keeps bandwidth consistent across all four channels without thermal throttling from spreaders. Performance scales with the platform's memory controller limits.
Βασικά χαρακτηριστικά
- 192 GB total capacity from four 48 GB modules
- DDR5 5600 speed rated at PC5-44800 bandwidth
- CL46 CAS latency for responsive timing
- 1 V operating voltage for efficient power draw
- Validated for Supermicro BH4SRG motherboard compatibility
Προδιαγραφές
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-4828K4 |
| Capacity | 192GB (4 x 48GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 192GB (4 x 48GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Ερωτήσεις για αυτό το προϊόν
What CAS latency does the DDR5 5600 kit run at?
The kit is rated at CL46, so the first timing limit you hit under sustained load is the 46-cycle CAS latency.
How much heat and power should I expect from the 1.10 V modules running all day?
At 1.10 V with no heat spreaders, the 4×48 GB DDR5 5600 UDIMMs draw minimal power and run cool enough for standard chassis airflow.
Which motherboard slot layout do I need for this 288-pin UDIMM kit?
The Supermicro BH4SRG must provide four DDR5 288-pin UDIMM slots to accept the 192 GB kit.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
