Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Six green DDR5 RDIMM modules without heat spreaders in a kit box

NEMIX RAM

NEMIX RAM 192GB (6x32GB) DDR5 5600 CL46 2Rx8 ECC RDIMM for GIGABYTE MZ33-CP1

SKU CH-9TQW-AZTXY

Six 32 GB DDR5 RDIMMs delivering 192 GB at 5600 MT/s with CL46 ECC for the GIGABYTE MZ33-CP1 motherboard

  • Capacity192GB (6 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 6X32GB

Προβολή 24 ακόμη διαμορφώσεων
  • 192 GB total capacity for memory-intensive server workloads using six 32 GB modules
  • DDR5 5600 speed with CL46 latency matching the board's rated specification
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 1 V operation at 2Rx8 rank exactly as the GIGABYTE MZ33-CP1 memory controller expects
  • 288-pin RDIMM form factor ensures physical and electrical compatibility with the target motherboard

192 GB DDR5 ECC RDIMM kit for GIGABYTE MZ33-CP1

This 192 GB kit contains six 32 GB DDR5 5600 RDIMMs rated at CL46 and 1.1 V. Each module uses a 2Rx8 registered ECC design on a 288-pin form factor built with major OEM DRAM. It is an exact-match upgrade for the GIGABYTE MZ33-CP1 motherboard so the memory controller recognises the full capacity at rated speed.

Suited for servers that require registered ECC

The registered buffer offloads the memory controller and ECC corrects single-bit errors, making this kit appropriate for workloads that demand data integrity and full-slot population. Systems that accept only unbuffered UDIMMs or SODIMMs cannot use these modules. Buyers who need a different capacity, speed or voltage should verify their platform's qualified vendor list before ordering.

Behaviour under sustained load

Registered architecture keeps every slot stable when all six DIMMs are populated continuously. ECC detects and corrects single-bit errors on the fly, preventing silent data corruption during long-running tasks. The 1.1 V operating voltage supports efficient operation while the memory controller maintains the rated DDR5 5600 transfer rate.

Βασικά χαρακτηριστικά

  • 192 GB total capacity for memory-intensive server workloads using six 32 GB modules
  • DDR5 5600 speed with CL46 latency matching the board's rated specification
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 1 V operation at 2Rx8 rank exactly as the GIGABYTE MZ33-CP1 memory controller expects
  • 288-pin RDIMM form factor ensures physical and electrical compatibility with the target motherboard

Προδιαγραφές

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K6
Capacity192GB (6 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 6X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Άλλες εκδόσεις αυτού του μοντέλου

5 ακόμη στην ίδια σειρά

Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.

Ερωτήσεις για αυτό το προϊόν

Does the GIGABYTE MZ33-CP1 motherboard require all six DDR5 slots to be populated for this 192GB kit to operate?

The kit contains six 32GB modules. The motherboard manual defines the supported capacities and approved DIMM population order; consult it before installation to confirm whether all slots must be filled.

Can I mix these CL46 2Rx8 registered ECC modules with any existing DDR5 UDIMMs already installed in the server?

No. Registered RDIMMs and unbuffered UDIMMs use different signalling and cannot be mixed on the same memory controller.

After installation, how do I confirm the kit is running at the rated DDR5 5600 speed with CL46 timings?

Enter the system BIOS or use a hardware-information utility to verify the memory frequency shows 5600 MT/s and the CAS latency reads CL46.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.