Sixteen green DDR5 RDIMM modules in a row, black chips, no heat spreaders, 288 pins visible

NEMIX RAM

NEMIX RAM 1TB (16×64GB) DDR5 4800 CL40 ECC RDIMM for Dell Precision 7960 memory upgrade

SKU CH-X7F2-44JV3

1TB DDR5 4800 ECC registered memory kit with sixteen 64GB modules for Dell Precision 7960 workstations

Capacity1TB (16 x 64GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V

1TB total capacity from 16 modules of 64GB each
DDR5 4800 speed with PC5-38400 bandwidth for high-throughput workloads
ECC registered RDIMM design detects and corrects data errors in critical applications
CL40 CAS latency at 1.1V voltage balances responsiveness and power efficiency
Validated for Dell Precision 7960 rack and tower workstation compatibility

28.556,99 $

0.36891523 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες Δωρεάν
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

Dell Precision 7960 memory kit

This 1 TB kit contains sixteen 64 GB DDR5 4800 CL40 ECC registered DIMMs built for the Dell Precision 7960 rack or tower workstation. The modules run at 1.1 V and use a 288-pin RDIMM form factor with 2Rx4 organisation. They add error-correcting capacity for demanding professional workloads.

Workstations needing maximum ECC capacity

The kit suits Precision 7960 owners who want the full 1 TB configuration in a single matched set. It is not for systems that cannot accept registered DDR5 ECC modules or that require a different speed, voltage or rank layout. Builders needing non-ECC or unbuffered memory should look elsewhere.

DDR5 4800 CL40 registered ECC specification

The decisive specification is the DDR5 4800 CL40 registered ECC RDIMM standard at 1.1 V with 2Rx4 ranking. Only motherboards and processors qualified for this exact combination will operate correctly with the kit.

Βασικά χαρακτηριστικά

1TB total capacity from 16 modules of 64GB each
DDR5 4800 speed with PC5-38400 bandwidth for high-throughput workloads
ECC registered RDIMM design detects and corrects data errors in critical applications
CL40 CAS latency at 1.1V voltage balances responsiveness and power efficiency
Validated for Dell Precision 7960 rack and tower workstation compatibility

Προδιαγραφές

Brand	NEMIX RAM
Series	Dell Server/Workstation Compatible Series Memory
Model	Dell DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part Number	MR38400-924K16
Capacity	1TB (16 x 64GB)
Speed	DDR5 4800 (PC5 38400)
ECC	Yes
Buffered/Registered	Registered
Chipset	Major OEM Samsung, Micron, Hynix
Voltage	1.10V
Compatible System	Dell
CAS Latency	CL40
Heat Spreader	No
Type	288-Pin DDR5 RDIMM
Rank	2Rx4
Features	DDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content	1TB (16X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

Ερωτήσεις για αυτό το προϊόν

What motherboard slot count and memory type does the Dell Precision 7960 need to accept this 16-module kit?

The Dell Precision 7960 must provide sixteen DDR5 RDIMM sockets; each module is a 288-pin registered DIMM, so the board needs that many matching slots.

Will these DDR5 4800 CL40 modules run at their rated speed if I keep existing DDR5 4800 memory in the other channels?

Yes, mixing modules of the same DDR5 4800 speed and CL40 timing lets the memory controller operate all channels at 4800 MT/s without downclocking.

How can I verify the kit is detected with ECC active after installation?

Open the system BIOS or a Linux terminal with dmidecode and check that all sixteen 64 GB modules appear, the speed reads 4800 MT/s, and the ECC field shows enabled.

Επίσης σε αυτό το ράφι