NEMIX RAM 256GB (2x128GB) DDR4 3200 CL22 4Rx4 ECC RDIMM for THINKMATE GPX-QT8-24E2-8GPU memory upgrade

System-specific server memory kit

This NEMIX RAM kit delivers 256 GB across two 128 GB DDR4 3200 registered ECC RDIMMs built for the THINKMATE GPX-QT8-24E2-8GPU GPU-optimised server. Each module runs at 1.2 V with CL22 latency and a 4Rx4 organisation using major OEM DRAM from Samsung Micron or Hynix. The 288-pin registered design targets mission-critical workloads that require error correction and signal integrity.

Registered ECC modules with OEM DRAM

Registered buffering reduces electrical load on the server memory controller while ECC corrects single-bit errors to protect data integrity during sustained GPU compute tasks. The 4Rx4 rank structure increases density per channel so the platform can reach 256 GB with only two slots populated. Modules are stress-tested under load before shipping to verify stability in the qualified Thinkmate chassis.

Tool-less DIMM installation in qualified slots

Installation follows the standard server procedure: power down, open the chassis, align the 288-pin key and press each RDIMM until the ejector tabs lock. Because the kit is validated for the specific Thinkmate model the firmware recognises the SPD timings automatically. The most common issue is mixing these registered modules with unbuffered DIMMs or populating slots in an order the motherboard manual does not support.