Two green DDR4 RDIMM sticks, no heat spreaders, gold edge connectors

NEMIX RAM

NEMIX RAM 256GB (2x128GB) DDR4 3200 PC4-25600 ECC RDIMM memory upgrade

SKU CH-JZ4P-ZWYR7

256GB dual-channel DDR4 3200 ECC registered server memory kit with 1.2V CL22 timing for Thinkmate rackmount systems

Capacity256GB (2 x 128GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V

256 GB total capacity with two 128 GB modules
DDR4 3200 speed rated at PC4-25600 bandwidth
ECC registered design detects and corrects data errors
2 V operation reduces server power draw
Validated for Thinkmate RAX-PT10-11A1, RAX-PT8-12A1, RAX-PT12-12A1 rackmount servers

1.780,99 $

0.02250742 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες Δωρεάν
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

256GB DDR4-3200 ECC RDIMM Kit

This 256GB kit contains two 128GB registered DIMMs built for ThinkMate rackmount servers. Each module runs at DDR4 3200 (PC4-25600) with CL22 latency at 1.2V. The 4Rx4 organisation and ECC registration target administrators who need maximum capacity per slot in compatible ThinkMate RAX-PT platforms.

Upgrading from lower-capacity RDIMMs

Replacing smaller registered modules with this 2x128GB kit doubles or quadruples per-slot density without changing voltage or speed. The jump is worthwhile when workloads such as virtualisation or in-memory databases hit the current memory ceiling and the server board supports 4Rx4 registered DIMMs at 3200 MT/s.

Tool-less DIMM installation

Installation follows the standard 288-pin RDIMM procedure: power down, open the chassis, release the slot latches, align the notch, and press until the latches click. Common issues include mixing registered and unbuffered DIMMs, exceeding the platform’s maximum rank count per channel, or populating slots in an order the firmware does not recognise.

Βασικά χαρακτηριστικά

256 GB total capacity with two 128 GB modules
DDR4 3200 speed rated at PC4-25600 bandwidth
ECC registered design detects and corrects data errors
2 V operation reduces server power draw
Validated for Thinkmate RAX-PT10-11A1, RAX-PT8-12A1, RAX-PT12-12A1 rackmount servers

Προδιαγραφές

Brand	NEMIX RAM
Series	THINKMATE Server/Workstation Compatible Series Memory
Model	THINKMATE DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part Number	MR25600-744K2
Capacity	256GB (2 x 128GB)
Speed	DDR4 3200 (PC4 25600)
ECC	Yes
Buffered/Registered	Registered
Chipset	Major OEM Samsung, Micron, Hynix
Voltage	1.20V
Compatible System	THINKMATE
CAS Latency	CL22
Heat Spreader	No
Type	288-Pin DDR4 RDIMM
Rank	4Rx4
Features	DDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content	256GB (2X128GB) DDR4 3200MHZ PC4-25600 4Rx4 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Ερωτήσεις για αυτό το προϊόν

Will these 288-pin DDR4 RDIMMs fit the memory slots in a Thinkmate RAX-PT10-11A1 rackmount server?

Yes, the 288-pin DDR4 RDIMM form factor matches the DIMM slots on the listed Thinkmate RAX-PT10-11A1, RAX-PT8-12A1 and RAX-PT12-12A1 servers.

What is the correct way to seat the two 128 GB modules so the server recognises the full 256 GB?

Power down the server, open the chassis, align each module's notch with the slot key, press firmly until both retention clips click, then verify 256 GB in BIOS.

When should the ECC registered modules be replaced if correctable error counts start rising?

Monitor the platform's memory error logs; replace a module once correctable errors exceed the threshold recommended by the server vendor's maintenance guide.

Επίσης σε αυτό το ράφι