Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Two green DDR5 RDIMM modules with black chips, no heat spreaders, 288-pin server memory kit

NEMIX RAM

NEMIX RAM 256GB Kit (2x128GB) DDR5-6400 CL52 4Rx4 ECC RDIMM Supermicro X14SDI-36C-SP3F

SKU CH-CE4W-EYFAV

A 256 GB DDR5 server memory kit with two 128 GB registered ECC modules running at 6400 MHz CL52 and 1.1 V, validated for the Supermicro X14SDI-36C-SP3F motherboard

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 256GB 2X128GB

  • 256 GB capacity with two 128 GB modules for maximum server density
  • DDR5-6400 speed rated at PC5-51200 for high-throughput workloads
  • CL52 latency at 1.1 V balances responsiveness and power efficiency
  • Registered ECC 4Rx4 design corrects errors and stabilises fully populated channels
  • 288-pin RDIMM form factor validated for the Supermicro X14SDI-36C-SP3F motherboard

256GB DDR5-6400 ECC Kit for Supermicro X14SDI

This 256GB kit contains two 128GB DDR5-6400 Registered ECC RDIMMs built for the Supermicro X14SDI-36C-SP3F motherboard. Each module runs at 1.1V with CL52 latency and a 4Rx4 organisation. The registered design allows full-capacity operation across populated slots while ECC corrects single-bit errors on the fly. It is intended for administrators upgrading that specific platform.

Who This Kit Suits and Who Should Look Elsewhere

This kit suits IT teams expanding memory on a Supermicro X14SDI-36C-SP3F server that requires DDR5 Registered ECC RDIMMs. It will not work in systems that accept only unbuffered UDIMMs or SODIMMs. Buyers needing a different capacity, speed, voltage or form factor should look elsewhere.

The Deciding Specification: DDR5 Registered ECC

The single specification that decides compatibility is the DDR5 Registered ECC RDIMM form factor with 4Rx4 ranking at 1.1V. The Supermicro X14SDI-36C-SP3F memory controller expects this exact combination of registered buffering, ECC, rank structure and voltage. If your board calls for UDIMM, LRDIMM or a different voltage, this kit will not be recognised or will not train at DDR5-6400.

Βασικά χαρακτηριστικά

  • 256 GB capacity with two 128 GB modules for maximum server density
  • DDR5-6400 speed rated at PC5-51200 for high-throughput workloads
  • CL52 latency at 1.1 V balances responsiveness and power efficiency
  • Registered ECC 4Rx4 design corrects errors and stabilises fully populated channels
  • 288-pin RDIMM form factor validated for the Supermicro X14SDI-36C-SP3F motherboard

Προδιαγραφές

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-744K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

Άλλες εκδόσεις αυτού του μοντέλου

5 ακόμη στην ίδια σειρά

Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.

Ερωτήσεις για αυτό το προϊόν

How do I install these 288-pin DDR5 RDIMMs in the Supermicro X14SDI-36C-SP3F and which slot order is the one people get wrong?

Power off the server, open the chassis, and insert each 128GB module into the 288-pin DDR5 RDIMM slots following the exact population sequence listed in the Supermicro X14SDI-36C-SP3F manual; the common mistake is filling slots out of order, which prevents the 256GB kit from being recognised at full capacity and 6400MHz speed.

What maintenance or replacement will this 4Rx4 ECC registered kit need over its service life?

No routine maintenance is required for the DDR5 RDIMMs themselves; ECC corrects single-bit errors automatically, and if a module ever fails the lifetime replacement warranty covers a direct swap of the affected 128GB stick.

What limit appears first when the 256GB kit runs sustained workloads at 6400MHz CL52?

The memory controller's thermal and electrical envelope is the first ceiling; the 4Rx4 registered design offloads the controller so all slots run fully populated at 1.1V, but prolonged maximum throughput will eventually hit the platform's cooling or power budget before the modules' own rating.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.