BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00279553BTC
Διαθέσιμο
NEMIX RAM
NEMIX RAM 48GB DDR5 5600MHz CL46 2Rx8 1.1V 288-Pin UDIMM for ASUS ProArt Z790-CREATOR WiFi
A 48 GB DDR5 module running at 5600 MHz with CL46 latency, 1.1 V operation and dual-rank 2Rx8 layout, built for the ASUS ProArt Z790-CREATOR WiFi motherboard
- Capacity48GB
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 48 GB capacity expands workstation memory for large projects
- DDR5 5600 MT/s speed raises data throughput for demanding workloads
- CL46 latency timing supports stable operation at rated frequency
- 1 V voltage reduces power draw compared to higher-voltage modules
- 288-pin UDIMM form factor fits the ASUS ProArt Z790-CREATOR WiFi motherboard
NEMIX RAM 48GB DDR5 5600MHz UDIMM
This 48GB DDR5 module runs at 5600MHz with CL46 latency and 1.1V operation. It uses a 2Rx8 unbuffered non-ECC design on a 288-pin UDIMM form factor. The kit is validated for the ASUS ProArt Z790-CREATOR WiFi motherboard.
Suited for users expanding that specific ASUS
Builders needing ECC error correction or registered DIMMs should look elsewhere. Systems requiring lower latency timings or higher clock speeds than 5600MHz will not be satisfied. Buyers with a different motherboard model must verify compatibility before purchase.
Installs like any standard UDIMM into the board's
No heat spreader is fitted so clearance is minimal. The main risk is mixing this 48GB stick with existing modules of different speed, rank or voltage which can prevent boot or force downclocking. Always populate the slot recommended by the motherboard manual for single-module operation.
Βασικά χαρακτηριστικά
- 48 GB capacity expands workstation memory for large projects
- DDR5 5600 MT/s speed raises data throughput for demanding workloads
- CL46 latency timing supports stable operation at rated frequency
- 1 V voltage reduces power draw compared to higher-voltage modules
- 288-pin UDIMM form factor fits the ASUS ProArt Z790-CREATOR WiFi motherboard
Προδιαγραφές
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-4828K1 |
| Capacity | 48GB |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASUS |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 48GB (1 x 48GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM |
Ερωτήσεις για αυτό το προϊόν
Does the ASUS ProArt Z790-CREATOR WiFi motherboard need to be in place before I install this 288-pin DDR5 UDIMM?
Yes, the module is built for that specific motherboard, so the board must be installed and powered off before you insert the 288-pin DDR5 UDIMM into a free DIMM slot.
Can I run this CL46 DDR5 5600 stick with slower DDR5 modules already installed in the other slots?
The motherboard will clock all DDR5 modules to the lowest common speed and latency, so slower DDR5 DIMMs will work but the faster stick will run at their slower settings.
How can I confirm the single 48GB module is detected at 5600 MT/s with CL46 timings after installation?
Enter the UEFI BIOS on the ASUS ProArt Z790-CREATOR WiFi and check the memory information screen; it should show 48GB capacity, 5600 MT/s data rate and CL46 CAS latency.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
