BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277038BTC
Διαθέσιμο
NEMIX RAM
NEMIX RAM 64GB (2x32GB) DDR4 3200 CL22 2Rx8 1.2V 260-Pin SODIMM Kit for POSIFLEX ZT-3715
A 64 GB DDR4 SODIMM kit running at 3200 MT/s with CL22 timing for POSIFLEX ZT-3715 terminals
- Capacity64GB (2 x 32GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 64GB dual-channel kit expands POS terminal memory capacity
- DDR4 3200 speed matches system bus for stable throughput
- CL22 latency at 1.2V keeps power draw low
- 2Rx8 260-pin SODIMM form factor fits POSIFLEX ZT-3715 slots
- Major OEM chips from Samsung Micron Hynix ensure reliability
POSIFLEX ZT-3715 memory kit
This 64 GB kit contains two 32 GB DDR4 3200 SODIMM modules built for the POSIFLEX ZT-3715 Haydn ZT series terminal. Each stick runs at 1.2 V with CL22 latency and a 2Rx8 rank layout. The unbuffered non-ECC design matches the system's original specification.
Upgrade from lower-capacity DDR4 SODIMMs
Replacing the factory-installed modules with this dual-rank kit doubles or quadruples available memory for multi-tasking point-of-sale workloads. The jump is worthwhile when the terminal runs several applications simultaneously or handles larger local databases. No voltage or timing changes are required.
Suits IT teams maintaining ZT-3715 fleets
Technicians who need a validated, plug-compatible upgrade for this specific POS platform will benefit from the tested compatibility. Builders working on consumer laptops, generic industrial PCs, or systems requiring ECC registered memory should look elsewhere.
Βασικά χαρακτηριστικά
- 64GB dual-channel kit expands POS terminal memory capacity
- DDR4 3200 speed matches system bus for stable throughput
- CL22 latency at 1.2V keeps power draw low
- 2Rx8 260-pin SODIMM form factor fits POSIFLEX ZT-3715 slots
- Major OEM chips from Samsung Micron Hynix ensure reliability
Προδιαγραφές
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-328K2 |
| Capacity | 64GB (2 x 32GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 64GB (2X32GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM KIT |
Ερωτήσεις για αυτό το προϊόν
Does the 260-pin SODIMM form factor match the POSIFLEX ZT-3715 memory slots?
Yes, the kit uses the 260-pin DDR4 SODIMM form factor specified for the POSIFLEX ZT-3715, so each 32 GB module fits the factory slots without adapters.
What is the correct orientation step when inserting the 2Rx8 modules into the ZT-3715?
Align the notch on the 260-pin edge connector with the key in the slot, press firmly until the side clips click, and verify both 32 GB modules are fully seated before closing the chassis.
Will the CL22 3200 MHz modules require any firmware update or voltage adjustment later?
The modules run at the standard 1.2 V DDR4 voltage with CL22 timings; no firmware update or voltage change is needed for the POSIFLEX ZT-3715.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
