NEMIX RAM
NEMIX RAM 64GB (2x32GB) DDR5 5600 CL46 1.1V 2Rx8 ECC Registered RDIMM memory upgrade
A 64 GB DDR5 ECC registered DIMM kit running at 5600 MT/s with CL46 latency and 1.1 V operation for Supermicro H13SSH-E servers
- Capacity64GB (2 x 32GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- Exact-match DDR5-5600 kit installs at rated speed without manual tuning
- 64 GB (2 × 32 GB) dual-rank Registered ECC fills every slot at full capacity
- 1 V operation keeps power draw low while maintaining 5600 MT/s throughput
- CL46 latency and 2Rx8 organisation match the motherboard's timing expectations precisely
- 288-pin RDIMM form factor fits Supermicro H13SSH-E without adapters or guesswork
Exact-match DDR5 server kit
This 64 GB kit contains two 32 GB DDR5-5600 Registered ECC RDIMMs built to the 288-pin form factor. The modules run at 1.1 V with CL46 timing and a 2Rx8 organisation, matching the memory controller expectations of the Supermicro H13SSH-E motherboard. Registered buffering allows every slot to operate fully populated at rated speed while ECC corrects single-bit errors on the fly.
Upgrade from lower-capacity or slower DDR5 RDIMMs
Replacing smaller Registered ECC modules with this 64 GB kit doubles usable capacity per channel and keeps the native 5600 MT/s data rate. The jump is worth it when virtualization density, in-memory databases or large container workloads exceed the current memory ceiling and the platform already supports DDR5-5600 Registered DIMMs.
Fits Supermicro H13SSH-E memory slots
The 288-pin RDIMM form factor installs directly into the board's registered DIMM slots without adapters. Population rules in the motherboard manual dictate the installation order for full-capacity recognition. No heat spreader is present, so airflow across the module rows must be maintained by the server chassis cooling design. This kit does not suit systems that require unbuffered UDIMMs or SODIMM form factors.
Βασικά χαρακτηριστικά
- Exact-match DDR5-5600 kit installs at rated speed without manual tuning
- 64 GB (2 × 32 GB) dual-rank Registered ECC fills every slot at full capacity
- 1 V operation keeps power draw low while maintaining 5600 MT/s throughput
- CL46 latency and 2Rx8 organisation match the motherboard's timing expectations precisely
- 288-pin RDIMM form factor fits Supermicro H13SSH-E without adapters or guesswork
Προδιαγραφές
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-328K2 |
| Capacity | 64GB (2 x 32GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 64GB 2X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Ερωτήσεις για αυτό το προϊόν
Will this 288-pin RDIMM kit fit the DIMM slots on my Supermicro H13SSH-E motherboard?
Yes, the kit uses the 288-pin DDR5 RDIMM form factor required by the Supermicro H13SSH-E, so the modules seat directly in its server DIMM slots.
What is the correct installation order for the two 32 GB modules on this board?
Consult the Supermicro H13SSH-E manual for the approved DIMM population sequence; installing in the wrong slots can prevent the system from recognising the full 64 GB capacity.
How do I know when a module in this ECC registered kit needs replacement?
The registered ECC design corrects single-bit errors automatically; watch the system logs for corrected-error counts or uncorrectable errors, which indicate a module should be swapped out.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.



