Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR5 6400 CL52 1.1V ECC RDIMM 1Rx8 288-pin memory upgrade

SKU CH-GDCT-KE0DZ

A 64 GB DDR5 server kit of four 16 GB registered ECC RDIMMs running at 6400 MT/s with CL52 latency and 1.1 V, validated for Supermicro H13SRA-F and H13SRA-TF motherboards

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • Full 64 GB capacity recognised at DDR5-6400 speed
  • Registered ECC design prevents silent data corruption in production
  • 1 V operation lowers power draw per 16 GB module
  • 288-pin RDIMM form factor fits Supermicro H13SRA boards exactly
  • Major-brand Samsung, Micron or Hynix chips ensure enterprise reliability

Exact-match server kit

This 64GB kit contains four 16GB DDR5 6400 RDIMMs built to the exact rank, voltage and timing the Supermicro H13SRA-F and H13SRA-TF memory controllers expect. Registered ECC architecture offloads the controller so every slot runs fully populated at rated speed while correcting single-bit errors on the fly. The 1.1V CL52 specification matches the board's native profile without manual tuning.

Sustained enterprise stability

Registered buffering keeps electrical load low across all four slots during continuous multi-threaded workloads, preventing the signal degradation that can appear when consumer modules fill every channel. ECC detection and correction operates transparently under sustained write pressure, stopping silent data corruption before it reaches storage or network layers. The 1Rx8 organisation maintains consistent latency across the full 64GB capacity during long-running compute or virtualization tasks.

DDR5 platform limits

DDR5 6400 (PC5-51200) is the maximum JEDEC speed this motherboard family supports with four ranks populated, so the kit cannot run faster without exceeding the platform's qualified memory controller specification. The 288-pin RDIMM form factor is mandatory; UDIMM or SODIMM modules will not fit the server's DIMM slots. Consult the Supermicro manual for approved population order and maximum supported capacity per channel before installation.

Βασικά χαρακτηριστικά

  • Full 64 GB capacity recognised at DDR5-6400 speed
  • Registered ECC design prevents silent data corruption in production
  • 1 V operation lowers power draw per 16 GB module
  • 288-pin RDIMM form factor fits Supermicro H13SRA boards exactly
  • Major-brand Samsung, Micron or Hynix chips ensure enterprise reliability

Προδιαγραφές

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Άλλες εκδόσεις αυτού του μοντέλου

5 ακόμη στην ίδια σειρά

Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.

Ερωτήσεις για αυτό το προϊόν

Does the 1.1 V DDR5 kit run cool enough for a fully populated server chassis?

The modules operate at 1.1 V with no heat spreader, so they rely on the chassis airflow that Supermicro specifies for the H13SRA-F and H13SRA-TF platforms.

What motherboard slot type must my system provide for these 288-pin RDIMMs?

The kit requires DDR5 RDIMM slots on a Supermicro H13SRA-F or H13SRA-TF motherboard; UDIMM or SODIMM sockets will not accept the 288-pin registered form factor.

Can I mix the 1Rx8 Registered ECC modules with unbuffered UDIMMs already installed?

No, the registered architecture and ECC function are only supported when every populated slot uses matching RDIMMs; mixing with unbuffered memory will prevent the system from booting.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.