Green 288-pin DDR5 RDIMM module, no heat spreader, 64GB 4800 CL40 2Rx4 1.1V ECC registered

NEMIX RAM

NEMIX RAM 64GB DDR5 4800 CL40 2Rx4 1.1V ECC RDIMM MEM-DR564L-CL02-ER48 memory upgrade

SKU CH-WR7F-BVJA9

A 64 GB DDR5 registered ECC module running at 4800 MT/s with CL40 latency and 1.1 V operation for Supermicro servers

Capacity64GB
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V

64 GB capacity supports large server workloads
DDR5 4800 speed delivers high data throughput
ECC registered design protects data integrity
1 V operation reduces power consumption
Supermicro compatibility ensures reliable integration

1.694,99 $

0.02154393 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες Δωρεάν
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

NEMIX 64GB DDR5 ECC RDIMM

This 64GB DDR5 module operates at 4800 MT/s with CL40 latency and 1.10V voltage. It is a 2Rx4 registered ECC RDIMM built with major OEM chips for server and workstation stability. The 288-pin form factor fits compatible Supermicro platforms requiring registered memory.

Verify DDR5 RDIMM slot support

Confirm your motherboard accepts 288-pin DDR5 registered DIMMs with ECC and 2Rx4 organisation. Registered modules will not function in consumer boards that require unbuffered memory. Check the system manual for maximum capacity per slot and qualified vendor lists before ordering.

Fits Supermicro server and workstation builds

The module plugs directly into DDR5 RDIMM slots on supported Supermicro motherboards. ECC and registered buffering free the memory controller from parity duties and reduce electrical load per channel. No heat spreader is included, so airflow across the DIMM area must be adequate.

Βασικά χαρακτηριστικά

64 GB capacity supports large server workloads
DDR5 4800 speed delivers high data throughput
ECC registered design protects data integrity
1 V operation reduces power consumption
Supermicro compatibility ensures reliable integration

Προδιαγραφές

Brand	NEMIX RAM
Series	SuperMicro Server/Workstation Compatible Series Memory
Model	SuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part Number	MR38400-924K1
Capacity	64GB
Speed	DDR5 4800 (PC5 38400)
ECC	Yes
Buffered/Registered	Registered
Chipset	Major OEM Samsung, Micron, Hynix
Voltage	1.10V
Compatible System	Supermicro
CAS Latency	CL40
Heat Spreader	No
Type	288-Pin DDR5 RDIMM
Rank	2Rx4
Features	DDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content	64GB (1X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

Ερωτήσεις για αυτό το προϊόν

Does the package contain only the single 64GB module or are cables and brackets included?

The package contains one 64GB DDR5 4800 CL40 2Rx4 1.1V ECC RDIMM module; no cables, brackets or additional accessories are supplied.

Should I choose this 64GB DDR5 4800 CL40 2Rx4 ECC RDIMM or a lower-capacity alternative for my Supermicro server?

Select this 64GB module when your Supermicro platform requires maximum capacity per slot; choose a smaller module only if the system cannot address 64GB per DIMM.

What does the 4800 MT/s rating deliver once the module is installed in a compatible Supermicro system?

The module runs at DDR5 4800 (PC5-38400) with CL40 latency at 1.1V, providing registered ECC bandwidth and error correction for the qualified Supermicro platform.

Επίσης σε αυτό το ράφι