Green bare circuit board DDR5 RDIMM module with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 64GB DDR5 5600 CL46 4Rx4 ECC RDIMM for Dell PowerEdge XE9780L/XE9785L memory upgrade

SKU CH-X7GA-YGT9B

A 64 GB DDR5 registered ECC module running at 5600 MHz with CL46 latency and 1.1 V operation for Dell PowerEdge XE9780L and XE9785L servers

Capacity64GB
SpeedDDR5 5600 (PC5 44800)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V

Server-grade ECC corrects data errors for reliable operation
64GB capacity expands memory headroom for demanding workloads
DDR5 5600 speed delivers high bandwidth for data-intensive tasks
Registered 4Rx4 design supports dense configurations in compatible Dell PowerEdge systems
1V operation reduces power draw per module

2.109,99 $

0.02714791 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες Δωρεάν
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

Dell PowerEdge XE9780L and XE9785L server memory

This NEMIX RAM module provides 64GB of DDR5 ECC registered memory for Dell PowerEdge XE9780L and XE9785L rack servers. It operates at 5600MHz with a CAS latency of CL46 and runs at 1.1V. The single 288-pin RDIMM uses a 4Rx4 rank configuration.

Suited for administrators upgrading compatible

This module fits Dell PowerEdge XE9780L and XE9785L systems that support DDR5 5600 registered ECC RDIMMs. Builders working with consumer desktops, laptops, or servers requiring unbuffered UDIMMs, LRDIMMs, or non-ECC memory should choose a different part.

The registered ECC RDIMM form factor decides

The module is a 288-pin DDR5 RDIMM with on-board register and error-correcting code. Only motherboards wired for registered ECC DDR5 can use it; systems wired for unbuffered or load-reduced DIMMs will not accept this part.

Βασικά χαρακτηριστικά

Server-grade ECC corrects data errors for reliable operation
64GB capacity expands memory headroom for demanding workloads
DDR5 5600 speed delivers high bandwidth for data-intensive tasks
Registered 4Rx4 design supports dense configurations in compatible Dell PowerEdge systems
1V operation reduces power draw per module

Προδιαγραφές

Brand	NEMIX RAM
Series	NEMIX RAM Original Series Server Memory
Model	DDR5 ECC RDIMM Registered Server Memory
Part Number	MR44800-944K1
Capacity	64GB
Speed	DDR5 5600 (PC5 44800)
ECC	Yes
Buffered/Registered	Registered
Chipset	Major OEM Samsung, Micron, Hynix
Voltage	1.10V
Compatible System	Dell
CAS Latency	CL46
Heat Spreader	No
Type	288-Pin DDR5 RDIMM
Rank	4Rx4
Features	DDR5 ECC RDIMM Motherboard Compatible
Package Content	64GB (1 x 64GB) DDR5 5600MHz PC5-44800 4Rx4 1.1V 288-PIN ECC RDIMM

Ερωτήσεις για αυτό το προϊόν

Will this 4Rx4 DDR5 5600 RDIMM run in mixed ranks with existing 2Rx4 modules in my PowerEdge XE9780L?

The module is a 4Rx4 registered DDR5 5600 DIMM at 1.1 V; Dell PowerEdge XE9780L and XE9785L memory population rules determine whether mixed ranks are allowed per channel.

How do I verify the 64 GB DDR5 5600 CL46 ECC RDIMM is operating correctly after installation?

Check BIOS or iDRAC for 64 GB detected at 5600 MT/s, ECC enabled, and no correctable-error counters incrementing during POST or stress test.

Does the single 64 GB 288-pin DDR5 RDIMM ship with any heat spreader, cable or installation tool?

The package contains only the 64 GB 288-pin DDR5 5600 CL46 4Rx4 ECC RDIMM; no heat spreader, cables or tools are included.

Επίσης σε αυτό το ράφι