Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Green printed circuit board with black 288-pin DDR5 RDIMM memory module, no heat spreader, silver edge connectors

NEMIX RAM

NEMIX RAM 64GB DDR5 5600MHz ECC RDIMM 2Rx4 CL46 1.1V Supermicro X14SDV-42C-SP3F memory upgrade

SKU CH-WR0S-P7MXY

64GB DDR5 5600MHz ECC Registered RDIMM with CL46 latency and 1.1V operation for Supermicro X14SDV-42C-SP3F motherboards

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB

  • 64GB DDR5-5600 capacity lets your Supermicro X14SDV-42C-SP3F run fully populated at rated speed
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors on the fly
  • CL46 latency and 1.10V operation match the board's exact timing and voltage requirements
  • 2Rx4 288-pin RDIMM form factor fits the motherboard's memory-population rules without adapters
  • Built with major OEM Samsung Micron Hynix chips for enterprise-grade reliability

Server-grade DDR5 ECC upgrade

This 64 GB DDR5-5600 registered ECC RDIMM is built for the Supermicro X14SDV-42C-SP3F motherboard. It delivers 5600 MT/s bandwidth at 1.1 V with CL46 latency and a 2Rx4 rank structure. The module targets administrators who need exact-spec memory that the board recognises at full capacity and rated speed without manual tuning.

Verify board population rules

Before ordering, consult the motherboard manual for supported capacities, approved DIMM population order and any per-channel limits. The 288-pin registered form factor is mandatory; unbuffered UDIMMs or SODIMMs will not function. Confirm the server's current configuration allows an additional 64 GB module at the required slot position.

Thermals and power in normal use

Operating at the standard 1.1 V DDR5 voltage, the module draws minimal power and runs without a heat spreader. Registered buffering reduces electrical load on the memory controller, keeping temperatures stable across fully populated slots. Expect quiet, reliable operation in typical server airflow with no additional cooling requirements.

Βασικά χαρακτηριστικά

  • 64GB DDR5-5600 capacity lets your Supermicro X14SDV-42C-SP3F run fully populated at rated speed
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors on the fly
  • CL46 latency and 1.10V operation match the board's exact timing and voltage requirements
  • 2Rx4 288-pin RDIMM form factor fits the motherboard's memory-population rules without adapters
  • Built with major OEM Samsung Micron Hynix chips for enterprise-grade reliability

Προδιαγραφές

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K1
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Άλλες εκδόσεις αυτού του μοντέλου

5 ακόμη στην ίδια σειρά

Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.

Ερωτήσεις για αυτό το προϊόν

Does the 64GB DDR5 5600MHz ECC RDIMM arrive as a single module or a kit, and are any extra parts required for installation?

The package contains one 64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V CL46 288-pin ECC Registered RDIMM. No additional components are needed; the module installs directly into the motherboard's DDR5 RDIMM slots.

Should I choose the 64GB 2Rx4 CL46 1.1V version or a different capacity or rank for the Supermicro X14SDV-42C-SP3F?

Select the 64GB 2Rx4 CL46 1.1V module when your server requires a registered ECC RDIMM at DDR5 5600 speed. The 2Rx4 organisation and 1.1V operation match the board's memory-controller expectations for full-capacity recognition.

What does the 5600MHz PC5-44800 rating mean once the module is running in the Supermicro X14SDV-42C-SP3F?

The module will operate at DDR5 5600 MT/s (PC5-44800 bandwidth) with CL46 latency at 1.1V, delivering the exact speed and timing the motherboard's memory controller is designed for when fully populated with registered ECC DIMMs.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.