BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00278045BTC
Διαθέσιμο
NEMIX RAM
NEMIX RAM 8GB DDR3 1333MHz 1.35V 204-Pin SODIMM POSIFLEX KS-7410 memory upgrade
8 GB DDR3 SODIMM at 1333 MHz, 1.35 V, 204-pin, non-ECC, built for POSIFLEX KS-7410 terminals
- Capacity8GB
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- 8GB capacity boosts multitasking on POS terminals
- DDR3 1333MHz speed matches system specifications
- 35V low voltage reduces power consumption
- 204-pin SODIMM form factor fits POSIFLEX KS-7410
- Non-ECC unbuffered design ensures stable operation
NEMIX RAM 8GB DDR3 SODIMM for POSIFLEX KS-7410
This 8GB DDR3 1333MHz SODIMM is built for the POSIFLEX KS-7410 compact fanless POS terminal. It uses a 204-pin unbuffered non-ECC layout with 2Rx8 organisation and CL9 latency. The module draws 1.35V and is assembled with major OEM chips from Samsung, Micron or Hynix. It targets merchants and IT staff who need a direct drop-in upgrade for that specific point-of-sale platform.
Verify DDR3 SODIMM slot
Confirm the KS-7410 has a free 204-pin DDR3 SODIMM socket and that its memory controller accepts 1.35V low-voltage modules. The system must run unbuffered non-ECC memory at PC3-10600 speed with CL9 timing. Mixed-voltage or registered DIMMs will not function in this terminal. Check the service manual for maximum capacity per slot and total system limit before installation.
Sustained transaction workloads stay stable under
All modules undergo extended stress testing under load to verify reliability in continuous point-of-sale operation. The unbuffered design and major-brand DRAM maintain data integrity during long shifts without active cooling. CL9 latency and 1333MHz throughput keep checkout software responsive when the terminal processes back-to-back transactions for hours. No heat spreader is fitted, relying on the chassis airflow of the fanless unit.
Βασικά χαρακτηριστικά
- 8GB capacity boosts multitasking on POS terminals
- DDR3 1333MHz speed matches system specifications
- 35V low voltage reduces power consumption
- 204-pin SODIMM form factor fits POSIFLEX KS-7410
- Non-ECC unbuffered design ensures stable operation
Προδιαγραφές
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-828K1 |
| Capacity | 8GB |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM |
Ερωτήσεις για αυτό το προϊόν
Does the 8GB DDR3 1333MHz SODIMM arrive as a single stick or do I need to buy a second module?
The package contains one 8GB 204-pin SODIMM rated at 1333MHz PC3-10600 2Rx8 1.35V non-ECC unbuffered; no extra modules are included.
Should I choose the 1.35V or 1.50V variant for the POSIFLEX KS-7410 terminal?
The module is specified at 1.35V for the KS-7410; the 1.50V figure in the data sheet applies to standard DDR3 parts, not this low-voltage SODIMM.
Will the CL9 1333MHz rating actually run at that speed inside the fanless POS terminal?
The SODIMM is validated for DDR3 1333 PC3-10600 CL9 operation in the POSIFLEX KS-7410; the system BIOS will configure the 1.35V timing automatically.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
