Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Green printed circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR4 2400 ECC UDIMM CL17 1Rx8 1.2V 288-Pin memory upgrade

SKU CH-HMNA-FWH0G

An 8 GB DDR4 ECC UDIMM running at 2400 MHz with CL17 latency for compatible workstation systems

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection prevents data corruption in critical workloads
  • 2400 MHz DDR4 speed handles demanding applications smoothly
  • 2 V operation reduces power draw and heat
  • Single-rank 1Rx8 layout ensures broad motherboard compatibility
  • 288-pin UDIMM form factor fits standard workstation slots

8GB DDR4 ECC UDIMM for Hynix workstations

This 8GB DDR4 2400 module adds ECC-protected capacity to compatible Hynix workstations and servers. The unbuffered 288-pin DIMM operates at 1.2V with CL17 timing and a 1Rx8 organisation. It targets administrators who need reliable memory expansion for mission-critical systems without registered DIMM overhead.

Fits DDR4 ECC UDIMM slots in supported Hynix

The single-rank stick plugs directly into standard 288-pin DDR4 ECC UDIMM sockets on qualified motherboards. No heat spreader is fitted, keeping the module height low for dense chassis layouts. ECC capability frees the platform from silent data corruption during sustained workloads.

Stress-tested for continuous operation under load

Every module undergoes extended burn-in testing at rated speed to verify stability during prolonged compute tasks. The 1.2V JEDEC voltage and CL17 latency deliver consistent throughput without voltage scaling. Unbuffered architecture keeps latency deterministic for latency-sensitive server applications.

Βασικά χαρακτηριστικά

  • ECC protection prevents data corruption in critical workloads
  • 2400 MHz DDR4 speed handles demanding applications smoothly
  • 2 V operation reduces power draw and heat
  • Single-rank 1Rx8 layout ensures broad motherboard compatibility
  • 288-pin UDIMM form factor fits standard workstation slots

Προδιαγραφές

BrandNEMIX RAM
SeriesHynix Server/Workstaion Compatible Series Memory
ModelHynix DDR4 2666MHZ ECC Unbuffered UDIMM
Part NumberME19200-818K1
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemHynix
CAS LatencyCL17
Heat SpreaderNo
Type288-Pin DDR4 ECC UDIMM
Rank1Rx8
FeaturesDDR4 2666MHZ ECC Unbuffered UDIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2400MHZ PC4-19200 1Rx8 1.2V CL17 288-PIN ECC Unbuffered UDIMM

Ερωτήσεις για αυτό το προϊόν

Will the CL17 latency hold under sustained server workloads?

The module is rated CL17 at DDR4 2400 and uses ECC unbuffered chips from major OEMs, so latency remains stable during continuous operation.

How much heat does the 1.2 V unbuffered DIMM produce during all-day use?

Running at 1.20 V without a heat spreader, the 8 GB stick stays cool in typical workstation airflow and draws minimal power.

Which motherboard slot and chipset are required for this ECC UDIMM to function?

A 288-pin DDR4 slot on a board that supports unbuffered ECC memory is needed; the module is validated for Hynix-compatible platforms.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.