BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00278373BTC
Διαθέσιμο
NEMIX RAM
NEMIX RAM 8GB DDR4 3200 CL22 1Rx8 1.2V 288-Pin UDIMM for ASUS Prime X299-A II
8 GB DDR4 3200 CL22 1Rx8 1.2 V 288-pin UDIMM validated for the ASUS Prime X299-A II motherboard
- Capacity8GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 8GB DDR4 3200MHz boosts desktop responsiveness
- CL22 1.2V operation keeps power draw low
- 1Rx8 single-rank layout simplifies compatibility
- 288-pin UDIMM fits ASUS Prime X299-A II
- Major OEM chips (Samsung Micron Hynix) ensure reliability
8GB DDR4 module for ASUS Prime X299-A II
This 8 GB DDR4 3200 UDIMM is built for the ASUS Prime X299-A II motherboard. It runs at 1.2 V with CL22 latency and a single-rank 1Rx8 layout. The 288-pin unbuffered design fits standard desktop DIMM slots. IT professionals and enthusiasts upgrading compatible ASUS systems will find it validated for stability.
Replaces slower or lower-capacity DDR4 DIMMs
Swapping older DDR4 sticks for this 3200 MT/s module raises throughput to PC4-25600 without changing voltage. The jump is worth it when the board supports the speed natively and the workload benefits from extra bandwidth. Builders staying on the same platform avoid a full rebuild while gaining headroom for multitasking.
Fits a standard 288-pin DDR4 slot on the target
No heat spreader means clearance is minimal, so large CPU coolers will not interfere. The 1.2 V operation keeps power draw low and works with the motherboard's default memory voltage. One module leaves remaining slots free for future expansion up to the board's maximum capacity.
Βασικά χαρακτηριστικά
- 8GB DDR4 3200MHz boosts desktop responsiveness
- CL22 1.2V operation keeps power draw low
- 1Rx8 single-rank layout simplifies compatibility
- 288-pin UDIMM fits ASUS Prime X299-A II
- Major OEM chips (Samsung Micron Hynix) ensure reliability
Προδιαγραφές
| Brand | NEMIX RAM |
|---|---|
| Series | ASUS Gaming Motherboard Compatible Series Memory |
| Model | ASUS DDR4 3200MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD25600-818K1 |
| Capacity | 8GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | ASUS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM |
Ερωτήσεις για αυτό το προϊόν
Will this 288-pin DDR4 UDIMM fit the DIMM slots on my ASUS Prime X299-A II motherboard?
Yes, the module uses the standard 288-pin DDR4 UDIMM form factor that matches the four DDR4 slots on the ASUS Prime X299-A II.
What is the correct way to seat the module so it locks into place on the first try?
Align the notch on the module's gold edge connector with the key in the slot, press down firmly and evenly at both ends until the retention clips snap closed with a click.
Will I need to replace this 8GB stick if I want to reach the board's maximum memory capacity later?
The board supports up to 256 GB across four slots, so you can add three more modules instead of removing this one.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
