Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 CL22 260-Pin SODIMM POSIFLEX XT-8317 memory upgrade

SKU CH-WQ3E-AXR21

8GB DDR4 3200 CL22 SODIMM upgrades POSIFLEX XT-8317 terminals with 1.2V operation

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8GB capacity expands POS terminal multitasking headroom
  • DDR4 3200 speed matches system memory bus
  • CL22 latency keeps data flow consistent
  • 20V operation reduces power draw and heat
  • 260-pin SODIMM fits POSIFLEX XT-8317 slot exactly

POSIFLEX XT-8317 POS Terminal Memory

This 8 GB DDR4 SODIMM is built specifically for the POSIFLEX XT-8317 fanless point-of-sale terminal. It targets retailers, hospitality operators and system integrators who need a reliable memory upgrade for that exact platform. The module is tested for compatibility with the terminal's motherboard and firmware.

Upgrade from 4 GB or failed module

The jump is worthwhile when the terminal currently runs a single 4 GB stick or when an existing module shows errors under load. Adding this 8 GB unit doubles the capacity available to the POS application and restores stability in mission-critical environments. No benefit appears if the system already uses matched 8 GB modules.

Tool-free slot access on fanless chassis

Installation requires opening the terminal's service panel, aligning the 260-pin key and pressing until the latches click. The low-profile design fits the slim enclosure without a heat spreader. The most common issue is seating the module fully in the tight SODIMM socket; incomplete insertion causes a no-post condition.

Βασικά χαρακτηριστικά

  • 8GB capacity expands POS terminal multitasking headroom
  • DDR4 3200 speed matches system memory bus
  • CL22 latency keeps data flow consistent
  • 20V operation reduces power draw and heat
  • 260-pin SODIMM fits POSIFLEX XT-8317 slot exactly

Προδιαγραφές

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-828K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

Ερωτήσεις για αυτό το προϊόν

Will the 260-pin SODIMM fit the POSIFLEX XT-8317 memory slot?

Yes, the module is a 260-pin DDR4 SODIMM built for the POSIFLEX XT-8317 JIVA Fanless POS Terminal.

Which way does the key notch on the DDR4 SODIMM face when inserting it into the POSIFLEX XT-8317?

Align the off-centre notch on the gold edge with the slot key, press firmly until the side clips click — the common error is stopping before both clips latch.

Does the CL22 1.20V module need any future firmware updates or component swaps?

No firmware or scheduled swaps are required; the DDR4 SODIMM is a passive component rated for the life of the POSIFLEX XT-8317.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.