Sixteen green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM CSE-GS7A-2000B 256GB (16x16GB) DDR5 4800 CL40 ECC RDIMM memory upgrade

SKU CH-1P0K-EGCGC MPN CSE-GS7A-2000B

256 GB of DDR5 ECC registered memory in sixteen 16 GB modules running at 4800 MT/s with CL40 latency

Capacity256GB (16 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V

256 GB total capacity across 16 modules for dense server workloads
DDR5 4800 MT/s speed with PC5-38400 bandwidth for high-throughput applications
CL40 CAS latency at 1.10 V for efficient registered operation
ECC and registered design protects data integrity in mission-critical systems
Validated for Supermicro SuperWorkstation SYS-551A-T and X13SWA-TF platforms

6.404,99 $

0.08250026 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες Δωρεάν
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

Server memory kit

This NEMIX RAM kit provides 256GB of DDR5 ECC registered memory in sixteen 16GB modules. It runs at 4800MHz with CL40 latency and 1.1V voltage. The 288-pin RDIMM design targets Supermicro SuperWorkstation SYS-551A-T and X13SWA-TF platforms.

Suited for registered ECC workloads

This kit fits administrators expanding Supermicro workstations that require registered ECC RDIMMs. Builders needing unbuffered memory, non-ECC modules or consumer DDR5 form factors cannot use this product.

Module-only package

The box contains sixteen 1Rx8 RDIMM modules without heat spreaders. No cables, software licences or additional accessories are included, so installation relies entirely on the host system's memory slots and cooling.

Βασικά χαρακτηριστικά

256 GB total capacity across 16 modules for dense server workloads
DDR5 4800 MT/s speed with PC5-38400 bandwidth for high-throughput applications
CL40 CAS latency at 1.10 V for efficient registered operation
ECC and registered design protects data integrity in mission-critical systems
Validated for Supermicro SuperWorkstation SYS-551A-T and X13SWA-TF platforms

Προδιαγραφές

Brand	NEMIX RAM
Series	SuperMicro Server/Workstation Compatible Series Memory
Model	SuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part Number	MR38400-618K16
Capacity	256GB (16 x 16GB)
Speed	DDR5 4800 (PC5 38400)
ECC	Yes
Buffered/Registered	Registered
Chipset	Major OEM Samsung, Micron, Hynix
Voltage	1.10V
Compatible System	Supermicro
CAS Latency	CL40
Heat Spreader	No
Type	288-Pin DDR5 RDIMM
Rank	1Rx8
Features	DDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content	256GB (16X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

Ερωτήσεις για αυτό το προϊόν

Does this 16-module kit require a SuperMicro SuperWorkstation SYS-551A-T or X13SWA-TF motherboard to function?

The kit is validated for the SuperMicro SuperWorkstation SYS-551A-T and X13SWA-TF platforms; other DDR5 RDIMM systems may work but are not confirmed by the supplier.

Can I mix these 1Rx8 CL40 registered modules with older DDR5 ECC RDIMMs of different rank or speed?

Mixing ranks, speeds or latencies is not recommended; the motherboard will typically downclock all modules to the slowest common settings, which can reduce stability.

How do I verify the full 256GB kit is recognised and running at 4800 MT/s with ECC active?

Enter the system BIOS or UEFI and check the memory configuration screen; it should list 16 installed modules, show 4800 MT/s, CL40 timings and report ECC as enabled.

Επίσης σε αυτό το ράφι