Six green circuit boards with gold edge connectors and black memory chips, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 5600 288GB 6x48GB ECC RDIMM CL46 1.1V Supermicro H13SSH-E memory upgrade

SKU CH-N1NX-M2BJ9

A 288 GB DDR5 ECC RDIMM kit with six 48 GB modules running at 5600 MT/s, CL46 and 1.1 V for the Supermicro H13SSH-E motherboard

Capacity288GB (6 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes

288 GB total capacity with six 48 GB modules for maximum server density
DDR5 5600 speed rated at PC5-44800 for high-throughput workloads
Registered ECC RDIMM design corrects single-bit errors and stabilises fully populated slots
CL46 latency at 1.10 V matches the Supermicro H13SSH-E memory controller exactly
Lifetime replacement warranty with US-based technical support included

7.614,99 $

0.09707426 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες Δωρεάν
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

Exact-Match DDR5 Upgrade

This 288GB kit provides six 48GB DDR5 5600 RDIMM modules built to the Supermicro H13SSH-E memory controller specification. Registered ECC architecture and CL46 timing at 1.1V ensure the board recognises full capacity at rated speed without manual tuning.

Sustained Load Stability

Registered buffering offloads the memory controller so all slots stay fully populated at 5600 MT/s during continuous workloads. On-die ECC corrects single-bit errors in real time, preventing silent data corruption that would otherwise trigger unplanned reboots under heavy utilisation.

Pre-Install Checks

Verify the motherboard manual for approved DIMM population order and maximum supported capacity per channel before ordering. Confirm the system requires 288-pin RDIMM modules rather than UDIMM or SODIMM form factors to avoid fitment issues.

Βασικά χαρακτηριστικά

288 GB total capacity with six 48 GB modules for maximum server density
DDR5 5600 speed rated at PC5-44800 for high-throughput workloads
Registered ECC RDIMM design corrects single-bit errors and stabilises fully populated slots
CL46 latency at 1.10 V matches the Supermicro H13SSH-E memory controller exactly
Lifetime replacement warranty with US-based technical support included

Προδιαγραφές

Brand	NEMIX RAM
Series	NEMIX RAM Original Series Server Memory
Model	DDR5 ECC RDIMM Registered Server Memory
Part Number	MR44800-4828K6
Capacity	288GB (6 x 48GB)
Type	288-Pin DDR5 RDIMM
Speed	DDR5 5600 (PC5 44800)
CAS Latency	CL46
Voltage	1.10V
ECC	Yes
Buffered/Registered	Registered
Rank	2Rx8
Chipset	Major OEM Samsung, Micron, Hynix
Heat Spreader	No
Compatible System	Supermicro
Features	DDR5 ECC RDIMM Motherboard Compatible
Package Content	288GB 6X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Ερωτήσεις για αυτό το προϊόν

How much heat and power will the 1.1 V DDR5 5600 kit draw when the server runs continuously?

The modules operate at 1.1 V with DDR5 5600 speed and CL46 latency; registered ECC RDIMMs offload the memory controller, helping keep power draw steady during all-day workloads.

What motherboard and DIMM slots are required for the 6 x 48 GB registered ECC kit to function?

The kit is validated for the Supermicro H13SSH-E motherboard and needs six 288-pin DDR5 RDIMM slots populated in the board's prescribed population order.

Can the 2Rx8 DDR5 5600 RDIMMs share the Supermicro H13SSH-E with any existing DDR5 modules I keep?

All six slots must use identical 2Rx8 DDR5 5600 RDIMMs at 1.1 V CL46 to meet the board's population rules; mixing different ranks, speeds or voltages is not supported.

Επίσης σε αυτό το ράφι