Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

NEMIX RAM

NEMIX RAM DDR5 5600 512GB 4x128GB ECC RDIMM CL46 1.1V GIGABYTE MA34-CP0 memory upgrade

SKU CH-8MVD-RW37K

512 GB server memory kit with four 128 GB DDR5-5600 ECC registered RDIMMs at CL46 and 1.1 V for the GIGABYTE MA34-CP0 motherboard

  • Capacity512GB (4 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 512 GB total capacity with four 128 GB modules
  • DDR5 5600 speed rated at PC5 44800
  • Registered ECC design corrects single-bit errors on the fly
  • 1 V operation matches server memory controller requirements
  • 288-pin RDIMM form factor verified for GIGABYTE MA34-CP0

512GB DDR5-5600 ECC RDIMM Kit for GIGABYTE MA34-CP0

This 512GB kit contains four 128GB DDR5-5600 Registered ECC RDIMMs built to the exact 2Rx4 rank, 1.1V voltage and CL46 timing the GIGABYTE MA34-CP0 memory controller expects. The modules are 288-pin DDR5 RDIMMs using major OEM DRAM from Samsung Micron or Hynix and ship without heat spreaders. They are validated for full-capacity recognition at rated speed on the target platform.

Who this suits and who should look elsewhere

This kit is intended for administrators upgrading a GIGABYTE MA34-CP0 motherboard that requires Registered ECC DDR5 RDIMMs in a four-module population. Buyers needing unbuffered UDIMMs SODIMMs or non-ECC memory for workstations or consumer boards cannot use this product. Systems limited to lower maximum capacities per slot or different rank configurations should consult the motherboard manual before purchasing.

The specification that decides fit

The registered ECC RDIMM form factor with 2Rx4 organization at 1.1V CL46 is the single specification that determines whether this kit will be accepted by the MA34-CP0 memory controller. If the board calls for UDIMM SODIMM or a different rank voltage or timing combination the modules will not post or will run at reduced capacity. Verify the manual population rules and supported DIMM types before ordering.

Βασικά χαρακτηριστικά

  • 512 GB total capacity with four 128 GB modules
  • DDR5 5600 speed rated at PC5 44800
  • Registered ECC design corrects single-bit errors on the fly
  • 1 V operation matches server memory controller requirements
  • 288-pin RDIMM form factor verified for GIGABYTE MA34-CP0

Προδιαγραφές

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K4
Capacity512GB (4 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content512GB 4X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Άλλες εκδόσεις αυτού του μοντέλου

5 ακόμη στην ίδια σειρά

Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.

Ερωτήσεις για αυτό το προϊόν

Must the GIGABYTE MA34-CP0 motherboard support DDR5-5600 RDIMM ECC registered memory for this 4x128GB kit to function?

Yes, the board must accept DDR5-5600 (PC5-44800) 288-pin registered ECC RDIMMs at 1.1V; otherwise the modules will not be recognised or will run at reduced speeds.

If I populate all four slots with this 2Rx4 registered ECC kit, will the memory controller remain stable at full 512GB capacity?

Registered architecture buffers each rank, allowing the controller to drive all four slots at the rated DDR5-5600 CL46 timing without signal degradation.

How can I confirm the kit is operating at DDR5-5600 CL46 with ECC active after installation?

Check the BIOS memory information screen for 5600 MT/s, CL46 latency, 1.1V voltage and ECC status reported as enabled across all 512GB.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.