NEMIX RAM MD25600-818K2 16GB (2x8GB) DDR4 3200 CL22 for ASUS Pro Q670M-CE D4-CSM

Exact-match DDR4 kit for ASUS Pro Q670M-CE

This 16 GB kit contains two 8 GB DDR4 3200 UDIMMs rated at CL22 and 1.20 V. It is built for the ASUS Pro Q670M-CE D4-CSM motherboard and uses the 288-pin unbuffered non-ECC layout that board requires. Major OEM chips from Samsung, Micron or Hynix are tested at the rated speed and timing. The kit suits desktop owners who need a straightforward capacity increase without configuration changes.

Installation is standard UDIMM seating

Align the notch on each 288-pin module with the slot key, press down until the retention clips click, and the board will detect the memory at its rated 3200 MT/s. Because the kit matches the motherboard's rank, voltage and timing expectations, no manual BIOS adjustment is normally needed. Problems usually arise when slots are populated in an order the board's manual does not support or when an existing module has different timing or voltage.

Check your motherboard manual before ordering

Verify the maximum supported capacity per slot and the approved DIMM population sequence for the ASUS Pro Q670M-CE D4-CSM. Confirm that the board accepts 1Rx8 non-ECC unbuffered UDIMMs at 1.20 V and DDR4 3200 speed. If your current memory uses a different rank, voltage or latency, mixing may prevent the system from booting at the rated frequency.