BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277632BTC
Διαθέσιμο
NEMIX RAM
NEMIX RAM POSIFLEX POS DDR4 2133 CL15 16GB (2x8GB) SODIMM memory upgrade
A 16 GB DDR4 SODIMM kit running at 2133 MHz with CL15 timing for POSIFLEX RT-5116 terminals
- Capacity16GB (2 x 8GB)
- SpeedDDR4 2133 (PC4 17000)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB dual-channel kit boosts POS terminal responsiveness
- DDR4 2133 CL15 timing matches POSIFLEX RT-5116 specifications
- 2 V low-voltage modules reduce power draw in always-on kiosks
- 260-pin SODIMM form factor fits compact all-in-one chassis
- Major OEM Samsung, Micron or Hynix chips ensure industrial-grade reliability
POSIFLEX RT-5116 DDR4 SODIMM kit
This 16GB kit contains two 8GB DDR4 SODIMM modules built for the POSIFLEX RT-5116 terminal. Each stick runs at 2133 MT/s with CL15 latency at 1.2V. The unbuffered, non-ECC design matches the factory memory specification for this point-of-sale platform.
Tool-free slot access on the terminal
Installation usually takes a few minutes after removing the rear cover. The 260-pin modules key into the SODIMM slots in one orientation; forcing them can bend pins. Static discharge is the main risk, so touch metal before handling.
Verify slot count and maximum capacity
The RT-5116 uses SODIMM slots, not full-size DIMMs, and the board may limit total memory to 16GB. Confirm the terminal has two free slots or that you are replacing an existing pair. Check the service manual for any BIOS revision required for 8GB ranks.
Βασικά χαρακτηριστικά
- 16 GB dual-channel kit boosts POS terminal responsiveness
- DDR4 2133 CL15 timing matches POSIFLEX RT-5116 specifications
- 2 V low-voltage modules reduce power draw in always-on kiosks
- 260-pin SODIMM form factor fits compact all-in-one chassis
- Major OEM Samsung, Micron or Hynix chips ensure industrial-grade reliability
Προδιαγραφές
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 2133MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS17000-828K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 2133 (PC4 17000) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL15 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 2133MHZ PC4-17000 2Rx8 1.2V CL15 260-PIN Non-ECC Unbuffered SODIMM KIT |
Ερωτήσεις για αυτό το προϊόν
How can I verify the kit is running at DDR4 2133 CL15 after installation?
Open Task Manager or your BIOS and confirm the speed reads 2133 MT/s with CAS latency 15; the modules operate at 1.20 V and are 2Rx8 rank, so those values should appear without further adjustment.
What does the MS17000-828K2 package contain and is anything else required?
The box includes two 8 GB 260-pin DDR4 SODIMM modules for a total of 16 GB; no heat spreaders, cables or additional parts are supplied or needed for the POSIFLEX RT-5116 terminal.
Which capacity should I choose for the POSIFLEX RT-5116 — this 16 GB kit or a smaller option?
This kit provides the full 16 GB (2×8 GB) supported by the RT-5116; select it when you want the maximum memory the terminal accepts.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
