A small green circuit board with a 40-pin IDE connector, two SATA ports, a Molex power socket and included cables

NEON Drive

NEON Drive SATA to PATA/IDE Dual Adapter 40-pin 100/133

SKU CH-J614-4Z52N

Dual adapter connects SATA drives to 40-pin PATA/IDE systems or PATA/IDE drives to SATA hosts, supports ATA 100/133, includes SATA and Molex power cables

Connect SATA drives to legacy PATA motherboards
Convert PATA drives for use with SATA controllers
Supports ATA 100/133 transfer modes
Includes SATA data cable and power cable
Adds approximately 4cm drive length requiring case clearance

12,99 $

0.00015994 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες 39,90 $
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Προσθέστε 386,01 $ ακόμη και η βασική αποστολή γίνεται δωρεάν.

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

Dual SATA-to-IDE adapter for desktop drives

This NEON Drive adapter converts a SATA drive to a 40-pin PATA interface or a PATA drive to a SATA interface. It supports ATA 100/133 operation inside desktop computers. The kit includes a SATA data cable and a SATA power cable.

40-pin IDE and dual SATA ports with Molex power

The adapter provides one 40-pin IDE connector, two SATA ports for data and power, and a 4-pin Molex connector. It enables bidirectional conversion between SATA and PATA/IDE standards without requiring an external enclosure.

Adds 4 cm length and needs internal case space

Installation requires sufficient clearance inside the desktop chassis because the adapter extends the drive by about 4 cm. It is not compatible with external hard drive enclosures and is designed only for internal desktop drive bays.

Βασικά χαρακτηριστικά

Connect SATA drives to legacy PATA motherboards
Convert PATA drives for use with SATA controllers
Supports ATA 100/133 transfer modes
Includes SATA data cable and power cable
Adds approximately 4cm drive length requiring case clearance

Προδιαγραφές

Δεν έχουν δημοσιευτεί ακόμη προδιαγραφές για αυτό το προϊόν.

Ερωτήσεις για αυτό το προϊόν

What does the ATA 100/133 rating mean for actual transfer speed in a desktop?

The adapter supports ATA 100 and ATA 133 modes, so the connected drive can run at its native Ultra DMA speed up to 133 MB/s, limited by the drive and host controller.

Which SATA version does the dual adapter use, and what throughput does that cap?

The on-board SATA ports operate at SATA speeds, so the practical ceiling is the SATA interface limit rather than the PATA side.

How much extra case depth does the 40-pin IDE connector and cables add to the drive?

The unit adds about 4 cm to the drive length, so verify that your chassis has enough clearance behind the drive bay.

Επίσης σε αυτό το ράφι