Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Gray aluminum extruder body with 40-tooth drive gear and tension bolt, 110 x 80 x 65 mm

No Sew

No Sew Gray Extruder 40-Tooth 1.75mm Aluminum 3D Printers Accessories

SKU CH-D95W-ZQA34

Gray aluminium extruder kit with 40-tooth drive gear and adjustable tension upgrades Ender-3 and CR-10 printers for reliable 1.75mm filament feeding

  • ColorBlack
  • TypeFilament
  • Compatible SystemLinux
  • Specification11 L x 8 W x 6.5 H centimeters, Gray, 68 grams, /, Gray Extr
  • FeaturesExtruder, Aluminum Alloy, Aluminum
  • All-metal aluminum body resists cracking and wear for durable feeding
  • Adjustable tension bolt lets you tune idler pressure for consistent grip
  • 40-tooth drive gear gives stronger bite on 1.75mm filament
  • Beveled entry reduces filament scraping for steadier extrusion
  • DIY kit includes screws and parts for Ender-3 and CR-10 series

All-Metal Extruder Upgrade for Ender and CR-10

This gray aluminum alloy extruder replaces the stock plastic feeder on Ender-3 series and CR-10 series printers. The sandblasted and oxidized finish resists cracking and wear for more reliable long-term filament feeding. The kit includes all necessary screws and parts for a direct DIY installation without changing the stepper motor.

Adjustable Tension and 40-Tooth Drive Gear

A built-in adjustment bolt lets you tune idler pressure to match different filaments and printing conditions for consistent grip. The 40-tooth drive gear provides a stronger, more positive bite on 1.75mm filament. This combination helps prevent under-extrusion and improves feed stability across common materials including PLA, ABS, PETG, TPU and wood-filled filament.

Smoother Filament Path and Compact Package

A beveled filament entry reduces scraping as filament enters the feeder, supporting cleaner and steadier extrusion into the hotend. The assembled unit measures 11 x 8 x 6.5 centimeters and weighs 68 grams. The package dimensions are 110 x 80 x 65 millimeters with a weight of 175 grams.

Βασικά χαρακτηριστικά

  • All-metal aluminum body resists cracking and wear for durable feeding
  • Adjustable tension bolt lets you tune idler pressure for consistent grip
  • 40-tooth drive gear gives stronger bite on 1.75mm filament
  • Beveled entry reduces filament scraping for steadier extrusion
  • DIY kit includes screws and parts for Ender-3 and CR-10 series

Προδιαγραφές

Model/
Part NumberGray Extruder
ColorBlack
TypeFilament
Compatible SystemLinux
Specification11 L x 8 W x 6.5 H centimeters, Gray, 68 grams, /, Gray Extruder
FeaturesExtruder, Aluminum Alloy, Aluminum

Ερωτήσεις για αυτό το προϊόν

How do I install the extruder on an Ender-3 V2 and which step is often missed?

Mount the supplied aluminium body using the included screws; the step many skip is tightening the idler-tension bolt until the 40-tooth gear grips the 1.75 mm filament without slipping.

What part will need replacement after extended printing?

The 40-tooth drive gear will eventually wear and should be swapped when filament bite becomes inconsistent.

What limit appears first during a long, continuous print?

Heat soak in the aluminium body can soften PLA inside the feeder, so monitor extrusion consistency on jobs that run for many hours.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.