Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

OEM Industries

OEM Industries 80mm Fan A8025-26RB-3AN-F1 12V .24A 3-Pin

SKU CH-SEDF-CZ25V

An 80 mm square cooling fan drawing 12 V and 0.24 A via a 3-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Power Connector3 Pin
  • LEDNo
  • 80mm square frame fits tight cooler slots
  • 12V 0.24A draw keeps power use low
  • Three-pin connector enables motherboard speed control
  • Black finish matches most build themes
  • Cooler Master OEM design ensures factory-grade fit

Purpose-fit 80 mm replacement fan

This 80 mm square cooling fan is built as a direct replacement for Cooler Master units carrying the A8025-26RB-3AN-F1 designation. It suits builders who need a 12 V, 0.24 A three-pin fan to restore airflow on an existing heatsink. Buyers who require PWM speed control or a larger frame size should look elsewhere.

Bundle impact

The package contains only the fan itself; no mounting screws, adapters or speed-control cables are included. Because the unit draws 0.24 A at 12 V, it will run at full speed whenever the motherboard header supplies power. Systems that rely on fan-curve tuning will lose that granularity with this three-wire design.

Installation reality

The three-pin connector fits standard motherboard headers and the 80 mm screw pattern aligns with Cooler Master mounting holes. The most common issue is cable length — the lead may fall short on taller tower coolers, requiring an extension. Vibration can appear if the four mounting screws are not tightened evenly across the square frame.

Βασικά χαρακτηριστικά

  • 80mm square frame fits tight cooler slots
  • 12V 0.24A draw keeps power use low
  • Three-pin connector enables motherboard speed control
  • Black finish matches most build themes
  • Cooler Master OEM design ensures factory-grade fit

Προδιαγραφές

ModelA8025-26RB-3AN-F1
ColorBlack
TypeFan only
Fan Size80mm
Power Connector3 Pin
LEDNo

Ερωτήσεις για αυτό το προϊόν

When will the A8025-26RB-3AN-F1 fan need maintenance or replacement?

The sleeve-bearing 80 mm fan runs at 12 V and 0.24 A; expect bearing noise to appear after several years of continuous operation, signalling a replacement.

What limit appears first when the A8025-26RB-3AN-F1 runs all day?

The 3-pin header supplies fixed 12 V, so the motor cannot exceed its rated 0.24 A; thermal throttling of the attached heatsink becomes the practical ceiling.

How much noise, heat and power does the A8025-26RB-3AN-F1 produce in 24/7 use?

At 12 V and 0.24 A the unit draws modest power, emits a low hum from its sleeve bearing, and adds minimal heat to the case airflow.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.