OWC
OWC 8GB DDR3L 1600 CL11 1.35V 240-pin desktop RAM
8GB DDR3L desktop module at 1600 MHz CL11 and 1.35 V, unbuffered non-ECC for NCR system upgrades
- Capacity8GB
- SpeedDDR3L 1600 (PC3L 12800)
- CAS LatencyCL11
- Voltage1.35V
- ECCNo
- Buffered/RegisteredUnbuffered
- Boosts multitasking with 8 GB DDR3L capacity
- Runs cooler at 1.35 V low-voltage DDR3L standard
- JEDEC compliant 1600 MHz CL11 timing ensures stable operation
- Direct drop-in replacement for NCR 497-0503945 497-0519284 7350-K134
- Easy DIY upgrade in standard 240-pin desktop DIMM slots
Upgrade module for NCR systems
This 8 GB DDR3L DIMM matches NCR part numbers 497-0503945, 497-0519284 and 7350-K134. It runs at 1600 MHz with CL11 latency and 1.35 V operation. The unbuffered, non-ECC design fits standard 240-pin desktop sockets.
Suits owners of listed NCR desktops or workstations
Buyers needing ECC error correction, registered modules, higher speeds or different voltages should select another product. The single 8 GB capacity also limits total memory if multiple slots are unavailable.
JEDEC and RoHS compliant DDR3L specification
Compliance ensures the module meets industry electrical and environmental standards for a warranty-safe upgrade. The 1.35 V DDR3L rating is the key figure that determines whether the memory will function in the target system.
Βασικά χαρακτηριστικά
- Boosts multitasking with 8 GB DDR3L capacity
- Runs cooler at 1.35 V low-voltage DDR3L standard
- JEDEC compliant 1600 MHz CL11 timing ensures stable operation
- Direct drop-in replacement for NCR 497-0503945 497-0519284 7350-K134
- Easy DIY upgrade in standard 240-pin desktop DIMM slots
Προδιαγραφές
| Brand | OWC |
|---|---|
| Part Number | 1U6T32R808GB |
| Capacity | 8GB |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Color | Black |
| Heat Spreader | No |
| Recommend Use | Desktops |
| LED Color | None |
Ερωτήσεις για αυτό το προϊόν
Does my motherboard need a 240-pin DDR3L slot to accept this module?
Yes, the module uses a 240-pin UDIMM form factor and requires a desktop board with a DDR3L 1.35V slot.
Will this 1.35V DDR3L DIMM run correctly in a system that currently uses 1.5V DDR3 memory?
The module is JEDEC-standard DDR3L at 1.35V; most DDR3 boards will clock it down to 1.5V automatically, but check your board manual first.
How can I confirm the module is running at 1600 MHz CL11 after installation?
Open CPU-Z or the BIOS memory tab and verify the speed reads 1600 MHz (PC3L-12800) with CAS latency 11.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.



