Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Black full-tower chassis with three thick tempered glass panels

PCMART

PCMART Core P8 Tempered Glass Full-Tower Case Black

SKU CH-Q6QW-0EVKG

Full-tower chassis with three 4 mm tempered glass panels, front USB 3.0 and Type-C ports, and support for 480 mm and 360 mm radiators

  • TypeATX Mid Tower
  • Spacious full-tower design fits E-ATX and ATX motherboards
  • Four-millimetre tempered glass on three sides shows off the build
  • Front-panel USB 3.0 and USB-C give fast peripheral access
  • Supports 480 mm front and 360 mm top radiators for liquid cooling
  • Four internal 2.5-inch bays provide room for multiple SSDs

Core P8 Full-Tower Chassis

The Core P8 is a full-tower case built around three 4 mm tempered-glass panels that showcase internal hardware. It supports ATX, E-ATX, Micro-ATX and Mini-ITX motherboards and includes four internal 2.5-inch drive bays for solid-state storage.

Motherboard and Front-Panel Check

Verify that your motherboard form factor matches the supported ATX, E-ATX, Micro-ATX or Mini-ITX list before ordering. Confirm your board provides headers for two USB 3.0, two USB 2.0, one HD Audio and one USB Type-C connector to enable all front-panel ports.

Sustained Thermal Behaviour

The chassis accommodates a 480 mm radiator at the front and a 360 mm radiator on the top, allowing large liquid-cooling loops to move heat away continuously. Tempered-glass side panels remain closed during operation, so airflow depends entirely on the installed fan and radiator configuration.

Βασικά χαρακτηριστικά

  • Spacious full-tower design fits E-ATX and ATX motherboards
  • Four-millimetre tempered glass on three sides shows off the build
  • Front-panel USB 3.0 and USB-C give fast peripheral access
  • Supports 480 mm front and 360 mm top radiators for liquid cooling
  • Four internal 2.5-inch bays provide room for multiple SSDs

Προδιαγραφές

TypeATX Mid Tower

Ερωτήσεις για αυτό το προϊόν

What comes in the box and what must I buy separately?

The chassis ships with three 4 mm tempered glass panels, front I/O including two USB 3.0, two USB 2.0, HD Audio and one Type-C port, plus mounting hardware for supported motherboards and drives. Fans, radiators, power supply and storage devices are not included.

Which motherboard form factor should I choose for this full-tower?

The case fits ATX, E-ATX, Micro-ATX and Mini-ITX boards; pick E-ATX if you need the most expansion slots, otherwise ATX or smaller will also mount securely.

What does the 480 mm front radiator support mean for my cooling loop?

You can install an all-in-one liquid cooler with a radiator up to 480 mm at the front and up to 360 mm at the top, allowing high-capacity liquid cooling for CPU and GPU in a single build.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.