Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Pair of black and red 10AWG solar extension cables with MC4 connectors, 32.8ft each, silicone insulation

PFCTART

PFCTART 32.8ft 10AWG 6mm² Solar Panel Extension Cable Pair

SKU CH-CGAD-SB4QR

A 10 m, 10 AWG tinned-copper pair with MC4 connectors rated to 1000 V DC and IP67 for off-grid solar wiring

  • TypeSolar Panel Kits
  • Cell TypeSolar Connector
  • Solar Panel KitsOff-Grid
  • Kit AccessoriesWiring & Connector
  • Solar InvertersOff-Grid Inverters
  • Size/Dimensions10 M
  • Reliable power delivery with super low electrical resistance and no voltage drop
  • Durable tinned copper conductor resists oxidation and corrosion for long service life
  • Flexible silicone insulation withstands -60 °C to +200 °C and offers high flame resistance
  • Secure IP67 rated MC4 connectors crimped and soldered to prevent pull-off or partial contact
  • 8 ft 10 AWG pair handles 1000 V DC for off-grid solar installations

Off-Grid Solar Cable Pair

This 32.8ft extension cable pair uses 10AWG tinned copper conductors rated for 600V nominal voltage. It connects solar panels to off-grid inverters or DC circuits in residential and portable installations. The red and black leads arrive with MC4 connectors already crimped and soldered.

Thermal and Electrical Performance

Silicone insulation withstands a nominal temperature range of -60 to +200°C and carries a 2000V testing voltage rating. MC4 connectors are rated for 1000V DC and IP67 waterproof protection. The design targets super low electrical resistance with no measurable voltage drop under load.

Build and Daily Handling

Tinned copper cores resist oxidisation and corrosion while the flexible silicone jacket provides high flame, thermal and chemical resistance. Crimped and soldered joints prevent connectors from pulling off during routing. The 10AWG gauge balances current capacity with manageable flexibility for rooftop or ground-mount layouts.

Βασικά χαρακτηριστικά

  • Reliable power delivery with super low electrical resistance and no voltage drop
  • Durable tinned copper conductor resists oxidation and corrosion for long service life
  • Flexible silicone insulation withstands -60 °C to +200 °C and offers high flame resistance
  • Secure IP67 rated MC4 connectors crimped and soldered to prevent pull-off or partial contact
  • 8 ft 10 AWG pair handles 1000 V DC for off-grid solar installations

Προδιαγραφές

BrandPFCTART
ModelSolar Panel Extension Cable
TypeSolar Panel Kits
Cell TypeSolar Connector
Solar Panel KitsOff-Grid
Kit AccessoriesWiring & Connector
Solar InvertersOff-Grid Inverters
Size/Dimensions10 M
FrameAnodized aluminum alloy
Junction BoxIP67 rated
ConnectorsMC4 Connectors
NOCT Optimum Operating Voltage (Vmp)1000V DC
Nominal Operating Cell Temperature (40C up to + 125C
Selling Unit1 Pair
Specifications10AWG
FeaturesLow Voltage Protection, Overcurrent Protection, Overload Protection
Sports League6mm²

Ερωτήσεις για αυτό το προϊόν

How do I install the 32.8ft 10AWG cables with MC4 connectors and what step is often missed?

Plug the pre-crimped and soldered MC4 connectors together until they click, then verify the IP67 seal is fully seated; the step often missed is confirming the audible click that locks the connector.

What maintenance or replacement will the tinned copper conductors and silicone insulation need later?

Inspect the MC4 connectors and silicone jacket annually for cracks or corrosion; the tinned copper core resists oxidation so conductor replacement is rarely needed unless physical damage occurs.

What limit appears first during sustained 1000V DC operation at high temperature?

The connector rating of 1000V DC and the 125 °C upper operating temperature are the first limits; exceeding either risks insulation breakdown or seal failure.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.