Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

PrimoChill

PrimoChill Praxis WetBenchSX Basic Angled Edition Open-Air Test Bench 338x440mm

SKU CH-XBRH-7SNY1

An open-air test bench measuring 338 by 440 mm with quick-assembly modular steel frame, tool-free motherboard and radiator brackets, and support for up to four 480 mm radiators or two AIOs

  • TypeOpen-Air

Options Black

  • Black
  • White

Οι διαγραμμένες εκδόσεις υπάρχουν, αλλά δεν είναι διαθέσιμες εδώ.

  • Quick assembly in minutes with tool-free design
  • Motherboard and radiator brackets detach in seconds
  • Supports up to four radiators with 480 mm maximum length
  • AIO brackets accommodate two units with 13 in tube length
  • Anti-vibration pads on feet PSU and radiator mounts

Compact Open-Air Test Bench

The PrimoChill Praxis WetBenchSX Angled Edition is a powdercoated steel open-air frame built for watercooled or air-cooled component testing. It assembles in minutes and features quick-release brackets for the motherboard and radiator mounts. Anti-vibration pads are included for the power supply, radiator and feet to reduce operational noise. The angled layout provides a rigid, modular platform for frequent hardware swaps.

For Bench Testers, Not Permanent Builds

This bench suits enthusiasts and reviewers who need fast access to components for validation, overclocking or loop maintenance. The open design allows unrestricted installation of reservoirs, blocks and radiators up to 480 mm. Builders who want a closed chassis for dust protection, acoustic dampening or long-term desktop placement should look at enclosed cases instead. The frame has no panels or filters to contain airflow or debris.

Footprint Defines Workspace Fit

The bench measures 338 mm foot-to-foot length and 440 mm front-to-back width. These dimensions determine whether the unit fits your bench shelf, rack or transport case. Four radiator mounting positions support up to 480 mm radiators on this angled variant. Verify the available surface area before ordering.

Βασικά χαρακτηριστικά

  • Quick assembly in minutes with tool-free design
  • Motherboard and radiator brackets detach in seconds
  • Supports up to four radiators with 480 mm maximum length
  • AIO brackets accommodate two units with 13 in tube length
  • Anti-vibration pads on feet PSU and radiator mounts

Προδιαγραφές

TypeOpen-Air

Άλλες εκδόσεις αυτού του μοντέλου

4 ακόμη στην ίδια σειρά

Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.

Ερωτήσεις για αυτό το προϊόν

How often do the anti-vibration pads under the PSU and radiator mounts need replacing?

The pads are included to reduce vibration noise; they are simple rubber or silicone feet that can be swapped with generic replacements if they harden or tear after extended use.

Which dimension — the 338 mm length or the 440 mm width — limits the size of radiators I can fit?

Radiator clearance is governed by the 480 mm mounting allowance on the angled brackets, so the 440 mm depth of the frame is the practical limit for radiator length.

Does the powder-coated steel frame get hot enough to burn fingers when the system runs all day?

The open-air design lets component heat escape directly into the room; the steel frame itself stays near ambient temperature because no components are enclosed against it.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.