Raspberry Pi
Raspberry Pi Pico 22AJ1097 development board
Microcontroller board with dual-core ARM Cortex M0+ at 133 MHz, 264kB SRAM, 2MB Flash and 26 GPIO pins
- RP2040 dual-core ARM Cortex-M0+ runs up to 133 MHz for responsive real-time control
- 2 MB on-board Flash plus 264 kB SRAM stores code and data without external memory
- 26 multi-function GPIO pins connect sensors, displays and actuators directly
- USB 1.1 device and host support enables drag-and-drop programming and peripheral expansion
- Eight programmable I/O state machines create custom hardware interfaces in software
RP2040 microcontroller board for embedded projects
The Raspberry Pi Pico 22AJ1097 is a compact development board built around the RP2040 chip designed by Raspberry Pi. It provides a dual-core ARM Cortex M0+ processor running up to 133 MHz with 264kB of SRAM and 2MB of on-board Flash memory. Makers, students and engineers use it for controlling appliances, operating light displays and learning microcontroller programming in C or MicroPython.
Upgrade from basic boards when you need PIO
This board replaces simpler microcontroller modules when a project requires eight Programmable I/O state machines for custom peripheral support, dual SPI, I2C and UART interfaces, or 16 controllable PWM channels. The jump is worth it for applications needing precise timing, accelerated floating-point libraries or low-power sleep and dormant modes that basic boards lack.
Check USB 1.1 host support and castellated mounting
Verify that your carrier board design accommodates the castellated module for direct soldering and that your power supply can deliver adequate current over USB 1.1. Ensure your development environment supports drag-and-drop programming via mass storage and that 26 multi-function GPIO pins satisfy your sensor and actuator count before ordering.
Βασικά χαρακτηριστικά
- RP2040 dual-core ARM Cortex-M0+ runs up to 133 MHz for responsive real-time control
- 2 MB on-board Flash plus 264 kB SRAM stores code and data without external memory
- 26 multi-function GPIO pins connect sensors, displays and actuators directly
- USB 1.1 device and host support enables drag-and-drop programming and peripheral expansion
- Eight programmable I/O state machines create custom hardware interfaces in software
Προδιαγραφές
| Brand | Raspberry Pi |
|---|---|
| Model | 22AJ1097 |
| Part Number | 22AJ1097 |
Άλλες εκδόσεις αυτού του μοντέλου
2 ακόμη στην ίδια σειρά
Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.
Raspberry Pi Pico 22AJ1097 RP2040 2MB Flash Pack of 3 development board
Ερωτήσεις για αυτό το προϊόν
What board spacing do the castellated edges of the 22AJ1097 require for direct soldering?
The castellated module is designed to be soldered directly onto a carrier board; match the pad pitch to the module edge spacing when laying out the carrier.
Which step is often missed when putting the Pico into drag-and-drop programming mode over USB 1.1?
Hold the BOOTSEL button while plugging the USB cable in so the board enumerates as a mass-storage device before releasing the button.
What determines when the 2 MB on-board Flash on the 22AJ1097 needs to be rewritten?
The Flash stores your program and data; rewrite it whenever you update the firmware or change the stored application.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
NEMIX RAM DDR5 ECC RDIMM 1.5TB 12x128GB 6400MHz CL52 1.1V 2Rx4 288-Pin Supermicro H14SST-GE
- 1.5TB (12 x 128GB)
- 288-Pin DDR5 RDIMM
NEMIX RAM DDR5 6400 ECC Registered RDIMM 1.5TB 12x128GB 2Rx4 CL52 1.1V Supermicro H14DSH memory upgrade
- 1.5TB (12 x 128GB)
- 288-Pin DDR5 RDIMM
NEMIX RAM DDR5 ECC RDIMM 2TB 16x128GB 6400MHz CL52 1.1V 2Rx4 Supermicro H14DSH
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM





