Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Grey ATX power supply unit, compact box shape, single fan grille visible

Replace Power

Replace Power RPSU-C99-76 ATX power supply

SKU CH-D4JW-KK3FB MPN RPSU-C99-76

ATX power supply replaces legacy eMachines units with 115/230 V input and reduced 5.9" depth for tight chassis

  • ColorGrey
  • TypeATX
  • Fans1
  • Weight2.5
  • Replaces legacy eMachines PSUs for models 2882 2885 2890 2891 2892 2893
  • Switchable 115 V or 230 V input suits global mains voltages
  • Reduced depth 5.9 in height 3.4 in width fits tight cases
  • Over current over power and over voltage protection guards components
  • Includes SATA ATX 12V and LP4 connectors for drives and motherboard

Direct replacement for legacy eMachines systems

This ATX power supply is built to replace the original units in eMachines T2882, T2885, T2890, T2891, T2892 and T2893 desktops. It delivers the standard connectors those boards expect, including a 20+4 pin motherboard plug, a 12V ATX connector, one SATA connector, two large peripheral connectors and two small peripheral connectors. The 115 / 230 V switchable input lets it work on mains worldwide.

Compact grey chassis with single 80 mm fan

The grey steel housing measures 5.9 inches deep by 3.4 inches wide, a reduced depth that fits tight legacy cases without blocking drive bays or cables. A single 80 mm fan handles cooling, while over-current, over-power and over-voltage protection circuits guard connected components. Weighing 2.5 kg, it feels solid for a budget replacement unit.

Upgrade path for failed or noisy OEM units

This unit replaces a failed or ageing factory supply in the listed eMachines models and similar vintage ATX systems that use the same connector mix. The jump is worth it when the original PSU has died, runs loud or cannot spin up reliably. Builders needing multiple SATA drives, PCIe graphics power or higher total wattage should look elsewhere.

Βασικά χαρακτηριστικά

  • Replaces legacy eMachines PSUs for models 2882 2885 2890 2891 2892 2893
  • Switchable 115 V or 230 V input suits global mains voltages
  • Reduced depth 5.9 in height 3.4 in width fits tight cases
  • Over current over power and over voltage protection guards components
  • Includes SATA ATX 12V and LP4 connectors for drives and motherboard

Προδιαγραφές

BrandReplace Power
ModelRPSU-C99-76
ColorGrey
TypeATX
Fans1
Weight2.5

Ερωτήσεις για αυτό το προϊόν

Does the 20+4 pin ATX connector limit power delivery to older motherboards?

The 20+4 pin ATX connector fits both 20-pin and 24-pin motherboard sockets, so it works with the legacy eMachines models listed and newer boards alike.

Will the reduced depth of 5.9 inches height by 3.4 inches width fit my eMachines T2882 case?

Yes, the shorter 5.9-inch height and 3.4-inch width are designed for the compact chassis used by the T2882, T2885, T2890, T2891, T2892 and T2893.

How do I set the 115 / 230 V input switch before installing the unit?

Slide the red voltage selector to 115 V for North America or 230 V for Europe before plugging in; forgetting this step can damage the supply.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.