Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Two small green circuit boards with 40 pin IDE and 22 pin SATA connectors plus 4 pin power cables

RIITOP

RIITOP 2Pack 3.5" 40pin IDE to 22pin SATA Adapter

SKU CH-GF35-3KREN

Two adapters convert 3.5-inch 40-pin IDE drives to 22-pin SATA with JM-series chips and included 4-pin power cables

  • Changer TypeIDE to SATA
  • SpecificationsNOTE: 1. The adapter need for external power adapter to work
  • Connector A3.5" 40 pin Female IDE / PATA
  • Connector B7+15 pin (22 pin) SATA
  • FeaturesJM series chips, the best compatibility and stability. For I
  • Dimensions2.36x0.87x0.25 inch
  • Connect legacy 3.5" IDE drives to SATA ports using JM series chips
  • Two adapters and two 4-pin power cables included in one pack
  • Works with Windows XP, 7 and 8 on 32-bit and 64-bit systems
  • Compact 2.36 by 0.87 inch board fits tight drive bays
  • Requires external power and drive jumpers set before installation

3.5" IDE to SATA adapter kit

This two-pack converts 3.5 inch 40 pin IDE or PATA hard drives and optical drives to a 22 pin SATA interface. Each adapter uses JM series chips for broad compatibility with SATA 1, 2 and 3 motherboard ports. The kit includes two 4 pin power cables and supports Windows XP, 7 and 8 on both 32 and 64 bit systems.

Upgrading legacy storage to modern ports

The adapters replace a direct IDE connection when a motherboard no longer provides a 40 pin header or when a newer chassis only offers SATA power and data cables. The jump is worth it when you need to read or archive data from older 3.5 inch drives without sourcing a vintage controller card. An external power adapter is required for the drive itself.

Behaviour under sustained use

The compact 2.36 by 0.87 inch board draws power from the included 4 pin cable and passes data through the JM bridge without active cooling. During long copy sessions the chipset maintains a stable link across SATA generations, provided the host system is powered off before the riser is connected and the drive jumpers are set correctly.

Βασικά χαρακτηριστικά

  • Connect legacy 3.5" IDE drives to SATA ports using JM series chips
  • Two adapters and two 4-pin power cables included in one pack
  • Works with Windows XP, 7 and 8 on 32-bit and 64-bit systems
  • Compact 2.36 by 0.87 inch board fits tight drive bays
  • Requires external power and drive jumpers set before installation

Προδιαγραφές

BrandRIITOP
ModelN/A
Changer TypeIDE to SATA
SpecificationsNOTE: 1. The adapter need for external power adapter to work. 2. When connecting the riser need to turn off your computer. 3. IDE Hard disk / CD-ROM motherboard SATA adapter when the need to hard disk / CD-ROM set jumpers main dish.
Connector A3.5" 40 pin Female IDE / PATA
Connector B7+15 pin (22 pin) SATA
FeaturesJM series chips, the best compatibility and stability. For IDE drives, recorders, 3.5-inch ide hard disk drove, hard disk recorders. On behalf of the motherboard SATA 1, SATA 2 generations, SATA 3 generations interfaces perfectly compatible. Compatible with Windows XP, Win7, Win8 32-bit, 64-bit systems. IDE Hard disk / CD-ROM motherboard SATA adapter when the need to hard disk / CD-ROM set jumpers main dish. The adapter need for external power adapter to work. When connecting the riser need to turn off your computer. Size:(L*W)6.00*2.20cm/2.36"*0.87". Cable length:10.00cm/3.93". Quan
Dimensions2.36x0.87x0.25 inch
Weight80g / 0.18 lb.
Package Contents2x 3.5" IDE to SATA HDD Adapter. 2x 4Pin Power Supply Cable.

Ερωτήσεις για αυτό το προϊόν

Does the 3.5 inch 40 pin IDE connector need a specific clearance inside the drive bay?

The adapter board measures 2.36 by 0.87 by 0.25 inch, so it fits within a standard 3.5 inch drive bay without extra brackets.

What is the correct order for connecting the 22 pin SATA side and the 4 pin power cable?

Power down the system, attach the 4 pin power cable to the adapter first, then connect the 7+15 pin SATA plug to the motherboard.

Will the JM series chip on the adapter require a firmware update after a year of use?

No firmware is involved; the JM series chip is a fixed hardware bridge, so no software updates are needed over time.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.