RIMLANCE
RIMLANCE REU25600D8C2K64 64GB (2x32GB) DDR4 3200 ECC UDIMM 2Rx8 CL22
64 GB dual-rank ECC UDIMM kit running at 3200 MHz with CL22 latency for data-integrity workloads
- Capacity64GB (2 x 32GB)
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 3200 (PC4 25600)
- CAS LatencyCL22
- ECCYes
- Buffered/RegisteredUnbuffered
- 64 GB capacity supports large workloads
- ECC detects and corrects single-bit errors
- DDR4 3200 speed enables fast data transfer
- 2Rx8 dual-rank organisation improves memory density
- 2 V operation reduces power consumption
ECC UDIMM Kit for Servers
This 64GB kit contains two 32GB DDR4 3200 unbuffered ECC modules. It is built for servers and workstations that require data integrity and high capacity. The 2Rx8 organisation and PC4-25600 rating support demanding workloads.
Suited for ECC Platforms Only
The modules deliver error correction for mission-critical applications such as virtualisation and databases. Systems without ECC support in the memory controller cannot use this feature. Buyers needing registered or load-reduced DIMMs must choose a different product.
288-Pin DDR4 3200 CL22 Specification
Each module runs at 3200MHz with a CAS latency of 22 at 1.2V. The 288-pin DDR4 interface determines physical compatibility with the motherboard. Verify that the platform accepts unbuffered ECC UDIMMs at this speed before purchase.
Βασικά χαρακτηριστικά
- 64 GB capacity supports large workloads
- ECC detects and corrects single-bit errors
- DDR4 3200 speed enables fast data transfer
- 2Rx8 dual-rank organisation improves memory density
- 2 V operation reduces power consumption
Προδιαγραφές
| Brand | RIMLANCE |
|---|---|
| Model | REU25600D8C2K64 |
| Capacity | 64GB (2 x 32GB) |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
Ερωτήσεις για αυτό το προϊόν
How much power does the 1.2 V DDR4 3200 kit draw when the server runs continuously?
Each module operates at 1.2 V, the standard DDR4 voltage, keeping power draw low during all-day workloads.
What motherboard slot and memory channel setup do I need to install this 288-pin 2Rx8 kit?
You need a board with DDR4 UDIMM slots that accept 288-pin modules and support ECC unbuffered memory in a dual-channel configuration.
Will the 3200 MHz CL22 modules run stably with slower DDR4 ECC UDIMMs already in my system?
The kit is rated at 3200 MHz CL22; when mixed with slower DDR4 ECC UDIMMs the system will typically clock all modules down to the lowest common speed.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.



