INITMMO 1200x300mm Magnetic Dust Filter 2-Pack Black
- INITMMO 2 x 1200*30…
- not_applicable
Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.
Adjusts DC motor or LED brightness from 3 V to 35 V with 5 A overcurrent protection in a compact 30 mm by 24 mm module
This RioRand 1-OPKL-8L-5A module adjusts the speed of DC brush motors and the brightness of LED strips using a 10 kHz PWM signal. It accepts a 3 V to 35 V input range and delivers a 1 % to 100 % duty cycle for smooth, linear control. A built-in 5 A resettable fuse provides overcurrent protection that automatically resets after cooling. The package contains two identical controllers for parallel projects.
Each controller weighs 15 g and fits into small enclosures, freeing space for other components in robotics, automotive mods or DIY electronics. The board operates in two voltage modes: a default 5 V to 35 V range and a short-contact 3 V to 15 V mode for low-voltage loads. Reinforced soldering and individual functional testing support stable long-term operation. Wiring connects directly to the motor and power supply without extra adapters.
This suit builders who want plug-and-play speed control for DC brush motors, cooling fans or LED lighting within the 5 A limit. It is not for brushless motors, loads exceeding 5 A, or systems requiring closed-loop feedback or higher voltage rails. Users needing isolated control interfaces or programmable profiles should look at more advanced modules.
| Brand | RioRand |
|---|---|
| Model | 1-OPKL-8L-5A |
| Product name | RioRand |
| voltage | 35 volts_of_direct_current |
| electrical usage (watts) | 5 amps, 35 volts_of_direct_current |
| weight | 15 grams |
| description | RioRand, 1-OPKL-8L-5A, touch, DC motors, DC loads |
| finish | Plastic |
| material | Plastic |
| dimensions | 30 mm x 24 mm x 15 mm |
The controller is rated for 5 A at up to 35 V; the built-in resettable fuse disconnects only on overload and resets after cooling.
The compact 30 mm × 24 mm × 15 mm plastic housing has no heatsink; sustained high-current use may require additional airflow.
A DC source between 3 V and 35 V and a brushed DC motor or compatible DC load such as a fan or LED strip.
Επίσης σε αυτό το ράφι
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Το νόμισμα στο οποίο πληρώνετε, και αυτό στο οποίο βλέπετε τις τιμές.
Αποστέλλεται από το πορτοφόλι σας στο ταμείο
Μόνο για προβολή — ο κατάλογος αναγράφεται σε δολάρια
Κανένα νόμισμα δεν αντιστοιχεί.
Επιλέξτε τη γλώσσα στην οποία σας μιλάει ο ιστότοπος.
Καμία γλώσσα δεν ταιριάζει.
Πρώτη επίσκεψη;
Έχετε ήδη λογαριασμό;
Δεν υπάρχει αυτόματη επαναφορά κωδικού: αυτό το κατάστημα δεν στέλνει e-mail, άρα δεν υπάρχει σύνδεσμος μίας χρήσης να ζητήσετε. Αφήστε τη διεύθυνση στον λογαριασμό σας και κάποιος θα την επεξεργαστεί με το χέρι.
Το αίτημα καταχωρίστηκε
Δεν θα λάβετε τίποτα στα εισερχόμενά σας — το κατάστημα δεν στέλνει κανένα e-mail. Κάποιος το διαχειρίζεται με το χέρι.
Τον θυμηθήκατε;