sakose 12025-LED 120mm case fan 15 white LEDs 1100 RPM 16 dBA
- White
- White
Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.
sakose
A 120mm hydraulic-bearing case fan with 15 red LEDs running at 1100 RPM and 16 dB, supplied with anti-vibration rubber pads and a Molex 4-pin connector
Option 1 Pack
The sakose 12025-LED is a 120 mm case fan built around a hydraulic bearing and rated at 1100 RPM with a noise level of 16 dBA. It targets builders who want a single-colour red accent and quiet airflow for standard chassis cooling. The 12 VDC Molex 4-pin connector supplies power without a motherboard header.
The frame includes cut-back processing on both faces to increase air volume and improve heat transfer. Nine curved blades are designed to raise airflow and static pressure while reducing turbulent noise. Four anti-vibration rubber pads are supplied to decouple the fan from the case or radiator, limiting mechanical hum during daily use.
This unit replaces stock sleeve-bearing fans that develop rattle or lose speed over time. The sealed hydraulic bearing resists dust ingress and maintains consistent rotation, making the jump worthwhile when a system runs continuously or when a quieter acoustic profile is needed for a living-room build. Buyers who need PWM speed control or addressable RGB lighting should look elsewhere.
| Brand | Sakose |
|---|---|
| Color | Red |
| LED | Red |
Άλλες εκδόσεις αυτού του μοντέλου
Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.
The fan connects through a standard 4-pin Molex connector and runs on 12 VDC power from the power supply.
Anti-vibration rubber pads are supplied and the 120 mm frame fits the standard 120 mm mounting holes found on most chassis.
Secure the fan with the supplied rubber pads or screws, then plug the Molex connector into a free power supply lead; a common error is mounting it so the airflow blows the wrong way through the case.
Επίσης σε αυτό το ράφι
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Το νόμισμα στο οποίο πληρώνετε, και αυτό στο οποίο βλέπετε τις τιμές.
Αποστέλλεται από το πορτοφόλι σας στο ταμείο
Μόνο για προβολή — ο κατάλογος αναγράφεται σε δολάρια
Κανένα νόμισμα δεν αντιστοιχεί.
Επιλέξτε τη γλώσσα στην οποία σας μιλάει ο ιστότοπος.
Καμία γλώσσα δεν ταιριάζει.
Πρώτη επίσκεψη;
Έχετε ήδη λογαριασμό;
Δεν υπάρχει αυτόματη επαναφορά κωδικού: αυτό το κατάστημα δεν στέλνει e-mail, άρα δεν υπάρχει σύνδεσμος μίας χρήσης να ζητήσετε. Αφήστε τη διεύθυνση στον λογαριασμό σας και κάποιος θα την επεξεργαστεί με το χέρι.
Το αίτημα καταχωρίστηκε
Δεν θα λάβετε τίποτα στα εισερχόμενά σας — το κατάστημα δεν στέλνει κανένα e-mail. Κάποιος το διαχειρίζεται με το χέρι.
Τον θυμηθήκατε;