BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00276586BTC
Διαθέσιμο
SAMSUNG
SAMSUNG M378A2K43DB1-CTD 16GB DDR4 2666 CL19 1.2V 288-pin UDIMM desktop RAM
16 GB DDR4 desktop memory with 2Rx8 organisation, 288-pin UDIMM form factor and 1.2 V operation
- Capacity16GB
- SpeedDDR4 2666 (PC4 21300)
- CAS LatencyCL19
- Voltage1.20V
- ECCNo
- Buffered/RegisteredUnbuffered / Unregistered
- 16 GB capacity supports larger workloads
- 2666 Mbps speed moves data quickly
- CL19 latency keeps response tight
- 2 V operation reduces power draw
- 288-pin UDIMM fits standard desktop slots
16GB DDR4 2666 UDIMM module
This Samsung desktop memory module delivers 16GB of DDR4 capacity at 2666 MT/s with a CL19 latency. It is built for standard consumer motherboards that accept unbuffered, non-ECC UDIMMs running at 1.20V. The green PCB uses a 2Rx8 chip arrangement across 288 pins. Buyers who need ECC error correction or registered buffering for server platforms cannot use this module.
Speed grade DDR4 2666 PC4-21300
The decisive specification is the DDR4 2666 speed rating, labelled PC4-21300, paired with CL19 timing at 1.20V. This combination determines whether the module matches the memory controller’s supported JEDEC profile and whether the system can boot at the rated frequency without manual adjustment. If the platform only qualifies slower or faster JEDEC speeds, this module may downclock or require a BIOS update.
Tool-free DIMM slot installation
Installation is a simple press into a 288-pin DDR4 UDIMM slot until the retention clips click, requiring no tools or cables. The bare green PCB has no heat spreader, so it fits tight spaces but offers no thermal margin for sustained heavy loads. A common issue is seating the module incompletely, which causes a no-post condition; always verify both clips are fully engaged.
Βασικά χαρακτηριστικά
- 16 GB capacity supports larger workloads
- 2666 Mbps speed moves data quickly
- CL19 latency keeps response tight
- 2 V operation reduces power draw
- 288-pin UDIMM fits standard desktop slots
Προδιαγραφές
| Brand | SAMSUNG |
|---|---|
| Model | M378A2K43DB1-CTD |
| Capacity | 16GB |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered / Unregistered |
| Color | Green |
| Heat Spreader | No |
| LED Color | None |
Ερωτήσεις για αυτό το προϊόν
Will this 16GB DDR4 2666 module fit my motherboard?
It fits any desktop board with a 288-pin DDR4 UDIMM slot; check your manual for maximum speed and capacity per slot.
Does it need a heat spreader or extra cooling?
No spreader is included; standard case airflow is sufficient for the 1.2V JEDEC rating.
Can I mix this with my existing CL16 2666 sticks?
Yes, the system will run all modules at the slowest timings — here CL19 — so the mix is stable.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
