Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

Simmtec, Inc

Simmtec, Inc 8GB DDR3-1600 CL11 1.35V UDIMM

SKU CH-Z76R-H4N6A

8 GB DDR3 desktop module running at 1600 MHz with CL11 latency and 1.35 V operation

  • Capacity8GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • 8GB capacity expands multitasking headroom for everyday workloads
  • DDR3-1600 speed delivers 12800 MB/s bandwidth for responsive performance
  • CL11 latency keeps access times tight for smooth operation
  • 35V low-voltage design reduces power draw and heat output

8GB DDR3-1600 UDIMM for desktop upgrades

This Simmtec module provides 8GB of DDR3 memory running at 1600MHz with a CAS latency of CL11. It operates at a low voltage of 1.35V and uses a standard 240-pin UDIMM form factor. The dual-rank design features 16 chips in a 512x8 configuration.

Suits systems requiring PC3-12800 speed

Buyers needing higher capacities per module or different memory speeds should look elsewhere. This single stick does not support dual-channel performance on its own. Systems limited to 1.5V standard voltage may not be compatible with this low-voltage part.

Βασικά χαρακτηριστικά

  • 8GB capacity expands multitasking headroom for everyday workloads
  • DDR3-1600 speed delivers 12800 MB/s bandwidth for responsive performance
  • CL11 latency keeps access times tight for smooth operation
  • 35V low-voltage design reduces power draw and heat output

Προδιαγραφές

Capacity8GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11

Ερωτήσεις για αυτό το προϊόν

Does my motherboard need a 240-pin DDR3 slot to use this module?

Yes, this is a 240-pin UDIMM built for DDR3 motherboards with matching slots.

Will this 1.35 V DDR3-1600 CL11 stick run with my existing 1.5 V DDR3 modules?

It will down-clock to the lowest common speed and voltage; the system typically runs all modules at 1.5 V and the slowest timings present.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.