Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Silver stainless steel cleaning needles, tweezers and cloth in compact case

SIQUK SC-18-013 33 Pcs Nozzle Cleaning Kit 30 Needles 0.15-0.5mm 2 Tweezers Cloth

SKU CH-HT49-NQG2G

A 33-piece nozzle cleaning kit with 30 stainless-steel needles in five diameters, two precision tweezers and a cleaning cloth for maintaining most 3D printer extruders

  • ColorSilver
  • SpecificationStainless Steel, 6.5 L x 12.8 W x 2.3 H centimeters, Silver,
  • FeaturesStainless Steel
  • Five needle sizes clear 0.15 to 0.5 mm nozzles
  • Stainless steel needles resist bending during deep cleaning
  • Two precision tweezers remove stuck filament from gears
  • Microfibre cloth wipes residue without scratching surfaces
  • Compact 6.5 x 12.8 x 2.3 cm case stores 33 pieces

33-piece nozzle cleaning kit

This kit contains thirty stainless-steel cleaning needles in five diameters from 0.15 mm to 0.5 mm, two precision tweezers and one cleaning cloth. It is designed for owners of FDM 3D printers who need to clear blocked or partially obstructed extruder nozzles quickly. The assortment covers the most common nozzle bore sizes used in hobby and light-professional machines.

Replaces worn or missing single-size tools

A mixed-diameter set removes the guesswork when the exact nozzle size is unknown or when several printers share a workshop. The jump from improvised wires or single gauges is worth it whenever a jam halts a print and downtime costs more than the kit itself. Builders who only ever print with one fixed bore and already own a matching needle gain little extra value.

Easy to install and use

Each needle slips straight into the heated nozzle without disassembly; the tweezers grip hot filament fragments and the cloth wipes the tip between passes. The only common mistake is forcing a needle that is too large for the bore, which can damage the nozzle interior. Storing the pieces in the supplied case prevents loss and keeps the fine tips from bending.

Βασικά χαρακτηριστικά

  • Five needle sizes clear 0.15 to 0.5 mm nozzles
  • Stainless steel needles resist bending during deep cleaning
  • Two precision tweezers remove stuck filament from gears
  • Microfibre cloth wipes residue without scratching surfaces
  • Compact 6.5 x 12.8 x 2.3 cm case stores 33 pieces

Προδιαγραφές

BrandSIQUK
ModelSC-18-013
Part NumberSC-18-013
ColorSilver
SpecificationStainless Steel, 6.5 L x 12.8 W x 2.3 H centimeters, Silver, SC-18-013
FeaturesStainless Steel

Ερωτήσεις για αυτό το προϊόν

Will the 0.4 mm needle fit my E3D V6 nozzle?

The kit includes 0.4 mm stainless-steel needles listed as compatible with E3D Makerbot MK8 and RepRap extruder nozzles.

How do I avoid snapping a needle inside the hotend?

Heat the nozzle to printing temperature, then gently insert the correct-size needle straight in without forcing or twisting it.

When should I replace the needles or tweezers?

Replace any needle that bends permanently or shows a blunt tip, and swap tweezers if the tips no longer align cleanly.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.