BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00279215BTC
Διαθέσιμο
SK hynix
SK hynix 64GB 8x8GB DDR3 1600 PC3-12800 240-pin CL11 1.5V Non-ECC Desktop RAM
Eight 8 GB DDR3-1600 modules totalling 64 GB at CL11 and 1.5 V for desktop upgrades
- Capacity64GB (8 x 8GB)
- SpeedDDR3 1600 (PC3 12800)
- Voltage1.50V
- 64 GB total capacity from eight 8 GB modules
- DDR3 1600 speed rated at PC3-12800 for responsive desktop performance
- CL11 latency timing supports stable operation under load
- 5 V standard voltage keeps power draw predictable
- 100 % Memtest86+ verified for reliability out of the box
Kit composition
This kit supplies sixty-four gigabytes of DDR3 memory across eight 8GB modules running at 1600 MT/s with CL11 timings at 1.5V. It targets system builders who need maximum capacity on platforms limited to DDR3 technology.
Tested reliability
Every module passes a full Memtest86+ run before dispatch so the kit arrives verified at 100 percent stability. The non-ECC unbuffered design keeps latency low for standard desktop workloads without requiring server-grade chipset support.
Installation notes
The 240-pin DIMMs install in the usual desktop slots but the eight-module count demands a motherboard with eight DDR3 sockets and a memory controller able to address the full 64GB. Boards limited to four slots or lower density per channel cannot use the complete kit.
Βασικά χαρακτηριστικά
- 64 GB total capacity from eight 8 GB modules
- DDR3 1600 speed rated at PC3-12800 for responsive desktop performance
- CL11 latency timing supports stable operation under load
- 5 V standard voltage keeps power draw predictable
- 100 % Memtest86+ verified for reliability out of the box
Προδιαγραφές
| Capacity | 64GB (8 x 8GB) |
|---|---|
| Speed | DDR3 1600 (PC3 12800) |
| Voltage | 1.50V |
Ερωτήσεις για αυτό το προϊόν
Will the eight 8 GB DDR3 sticks need any firmware updates or component swaps over their service life?
The modules are non-ECC unbuffered DDR3 DIMMs with no firmware, so no updates or part swaps are required after installation.
What limit appears first when all 64 GB run at 1600 MT/s continuously?
The DDR3 1600 interface and CL11 timing set the throughput ceiling long before the 1.5 V chips reach thermal limits.
How much heat and noise should I expect from the 1.5 V kit during all-day workloads?
Each stick draws 1.5 V with no active cooling, so the kit adds minimal heat and zero acoustic noise to the chassis.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
