Solidigm
Solidigm D3-S4620 480GB 2.5" SATA enterprise SSD SSDSC2KG480GZ01
- 2.5"
- 480GB
929,99 $
0.01194469BTC
Διαθέσιμο
Solidigm
Solidigm D3-S4620 3.84TB 2.5" SATA enterprise SSD SSDSC2KG038TZ01
A 3.84 TB 2.5 inch SATA enterprise SSD built with 144L TLC 3D NAND for read-intensive server workloads
- Form Factor2.5"
- Capacity3.84TB
- Memory Components144L TLC 3D NAND
- InterfaceSATA III
- Max Sequential ReadUp to 550 MBps
- Max Sequential WriteUp to 510 MBps
Options 3.84TB 2.5"
- 3.84TB 2.5"
- 1.92TB 2.5"
- 960GB 2.5"
- 480GB 2.5"
Οι διαγραμμένες εκδόσεις υπάρχουν, αλλά δεν είναι διαθέσιμες εδώ.
- 84 TB capacity stores large datasets
- SATA III interface delivers up to 550 MB/s sequential read speed
- 144-layer TLC 3D NAND provides mid-endurance reliability for servers
- 1,000 G shock resistance protects data during operation
- Operating range 0 °C to 70 °C suits data-centre environments
Capacity and Interface
This Solidigm D3-S4620 drive provides 3.84TB of storage in a 2.5" form factor with a SATA III interface. It uses 144L TLC 3D NAND to deliver sequential reads up to 550 MBps and writes up to 510 MBps. The drive is built for server environments and operates between 0°C and 70°C.
Read-Intensive Workloads vs Write-Heavy Demands
The mid-endurance design suits read-intensive applications such as web hosting, content delivery or boot volumes where write cycles remain moderate. It is not a fit for write-heavy workloads such as heavy database logging, high-frequency transaction processing or sustained video ingest that exceed its endurance rating.
Endurance Class Decides Suitability
The single specification that determines fit is the mid-endurance rating inherent to the D3-S4620 series. If the target workload demands higher write endurance, this drive will wear out too quickly; if the workload is read-centric, the capacity and SATA interface make it a direct replacement for legacy hard disk drives.
Βασικά χαρακτηριστικά
- 84 TB capacity stores large datasets
- SATA III interface delivers up to 550 MB/s sequential read speed
- 144-layer TLC 3D NAND provides mid-endurance reliability for servers
- 1,000 G shock resistance protects data during operation
- Operating range 0 °C to 70 °C suits data-centre environments
Προδιαγραφές
| Brand | Solidigm |
|---|---|
| Series | D3-S4620 |
| Model | D3-S4620 |
| Form Factor | 2.5" |
| Capacity | 3.84TB |
| Memory Components | 144L TLC 3D NAND |
| Interface | SATA III |
| Max Sequential Read | Up to 550 MBps |
| Max Sequential Write | Up to 510 MBps |
| Operating Temperature | 0°C ~ +70°C |
| Max Shock Resistance | 1,000 G (Max) at 0.5 msec |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Max Non-Operating: 3.13 GRMS (5 - 800 Hz) Max |
| Βάρος αποστολής | 0.91 kg |
| Διαστάσεις συσκευασίας | 178 × 102 × 51 mm |
Άλλες εκδόσεις αυτού του μοντέλου
2 ακόμη στην ίδια σειρά
Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.
Solidigm
Solidigm D3-S4620 960GB 2.5" SATA Enterprise SSD SSDSC2KG960GZ01
- 2.5"
- 960GB
1.161,99 $
0.01492448BTC
ΔιαθέσιμοΕρωτήσεις για αυτό το προϊόν
How many drive writes per day is the 3.84TB D3-S4620 rated for over its warranty period?
The D3-S4620 series is a mid-endurance SATA drive; its 3.84TB model is rated for one full drive write per day over the warranty period.
What is the sustained sequential write speed once the SLC cache is exhausted on this 3.84TB SATA SSD?
The maximum sequential write speed is specified as up to 510 MBps, which is the sustained limit under continuous load.
What is the maximum operating temperature before the 2.5" D3-S4620 begins to throttle during all-day server use?
The drive is rated to operate from 0°C to 70°C; sustained heavy workloads at the top of this range may trigger thermal throttling.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
