Supermicro

Supermicro MBD-X6DHR-8GS-B server motherboard, Socket P, 16GB DDR2, Extended ATX

SKU CH-8GKE-4GHTW MPN MBD-X6DHR-8GS-B

Extended ATX server motherboard with dual Socket P support for Intel Xeon processors, 16GB DDR2 maximum memory and onboard Ultra320 SCSI, SATA/150 and ATA/100 RAID controllers

CPU Socket TypeSocket P
CPU TypeSupports Intel Xeon
North BridgeE7520
DDR3 StandardDDR2 SDRAM
Maximum Memory Supported16GB
SCSIFloppy Controller Ultra320 SCSI Serial ATA/150 Ultra ATA/100

Dual Socket P design supports two Intel Xeon processors
16 GB maximum DDR2 memory at 400 MHz for large workloads
Integrated Ultra320 SCSI, SATA 150 and ATA 100 controllers with RAID 0, 1, 1+0, JBOD
Onboard ATI Rage XL graphics and Gigabit Ethernet reduce add-in cards
Extended ATX form factor with two expansion slots and two USB ports

425,99 $

0.00545176 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες Δωρεάν
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

Dual-socket Extended ATX server board

The Supermicro MBD-X6DHR-8GS-B is an Extended ATX server motherboard built around the Intel E7520 north bridge and Socket P. It accepts two Intel Xeon processors and supports up to 16GB of DDR2 SDRAM running at 400 MHz. Integrated ATI Rage XL graphics and Gigabit Ethernet provide basic display and network connectivity out of the box.

Suits legacy dual-Xeon maintenance

This board fits technicians maintaining or repairing existing dual-socket Xeon systems that require Socket P processors and DDR2 memory. It also serves hobbyists building a period-correct server for older operating systems. Builders who need more than 16GB of RAM, modern CPU architectures, DDR3 or newer memory standards, or contemporary expansion interfaces should look at current-generation server platforms instead.

Onboard RAID and storage controllers

The integrated Ultra320 SCSI, Serial ATA/150 and Ultra ATA/100 controllers deliver hardware RAID 0, 1, 1+0 and JBOD across two SCSI and two SATA ports. Two onboard USB ports and a floppy controller round out the legacy I/O. These features let administrators configure redundant storage arrays without adding separate controller cards.

Βασικά χαρακτηριστικά

Dual Socket P design supports two Intel Xeon processors
16 GB maximum DDR2 memory at 400 MHz for large workloads
Integrated Ultra320 SCSI, SATA 150 and ATA 100 controllers with RAID 0, 1, 1+0, JBOD
Onboard ATI Rage XL graphics and Gigabit Ethernet reduce add-in cards
Extended ATX form factor with two expansion slots and two USB ports

Προδιαγραφές

Brand	SUPERMICRO
CPU Socket Type	Socket P
CPU Type	Supports Intel Xeon
North Bridge	E7520
DDR3 Standard	DDR2 SDRAM
Maximum Memory Supported	16GB
SCSI	Floppy Controller Ultra320 SCSI Serial ATA/150 Ultra ATA/100 (ATA-6)
Onboard Video Chipset	Intel
Form Factor	Extended ATX
Βάρος αποστολής	1.81 kg
Διαστάσεις συσκευασίας	51 × 51 × 51 mm

Ερωτήσεις για αυτό το προϊόν

Which processors must I already have to install in the Socket P slots?

The board uses two Socket P slots and supports Intel Xeon processors; you need a matching pair of Xeon CPUs for the PGA-604 socket.

Can I keep my Ultra320 SCSI and Serial ATA/150 drives when moving to this motherboard?

Yes, the onboard controllers provide two Ultra320 SCSI channels and two Serial ATA/150 ports, so existing SCSI and SATA drives connect directly.

How can I confirm the ATI Rage XL video and gigabit Ethernet are active after assembly?

Attach a monitor to the VGA port — the ATI Rage XL will display POST — and link a network cable; the gigabit Ethernet LED will light when the link is up.

Επίσης σε αυτό το ράφι