Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

SXDOOL

SXDOOL AD0824US-A71GL 80 mm 24 V 3900 RPM 50 CFM 41 dB case fan

SKU CH-T59B-QVKKS MPN AD0824US-A71GL

An 80 mm 24 V case fan delivering 50 CFM at 3900 RPM with 41 dB noise

  • 24 V DC power simplifies server and industrial wiring
  • 3900 RPM delivers 50 CFM airflow for tight 80 mm spaces
  • 41 dB noise keeps rack environments quiet
  • 2-wire 2-pin connector enables quick drop-in replacement

Compact 24 V 80 mm case fan

The SXDOOL AD0824US-A71GL is an 80 mm square frame fan built for 24 V DC systems. It draws 0.26 A and spins at 3900 RPM to move 50 CFM of air at a rated 41 dB noise level. Two-wire 2-pin connection keeps wiring simple for industrial or server chassis.

6.24 W airflow with 0.279 in H₂O pressure

At 6.24 W the fan delivers enough static pressure for dense heatsinks or restricted intake paths. It reaches its limit when a build demands higher volume than 50 CFM or quieter operation below 41 dB. Buyers needing greater airflow or lower noise at the same 80 mm footprint should look elsewhere.

Βασικά χαρακτηριστικά

  • 24 V DC power simplifies server and industrial wiring
  • 3900 RPM delivers 50 CFM airflow for tight 80 mm spaces
  • 41 dB noise keeps rack environments quiet
  • 2-wire 2-pin connector enables quick drop-in replacement

Προδιαγραφές

Δεν έχουν δημοσιευτεί ακόμη προδιαγραφές για αυτό το προϊόν.

Ερωτήσεις για αυτό το προϊόν

Will this 24 V, 0.26 A fan connect to the 2-pin header on my older motherboard?

The fan uses a 2-wire, 2-pin connector that matches standard 2-pin motherboard headers, so it will plug directly into an older board that supplies 24 V DC on that header.

How can I confirm the fan is running at the rated 3900 RPM after installation?

Check the RPM reading in BIOS or a hardware-monitoring utility; it should report roughly 3900 RPM when the fan receives its full 24 V supply.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.