Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

SXDOOL

SXDOOL ADDA AD0624VB-A71GP 24V 0.25A 60x60x25mm 2-pin case fan

SKU CH-53ZK-A7JHV

A 60 mm square, 25 mm thick case fan running on 24 V at 0.25 A with a two-pin connector

  • TypeCase Fan
  • 24 V operation suits industrial and server chassis
  • 60 mm square frame fits standard 6025 mounting holes
  • 25 mm thickness matches common slim-fan profiles
  • 25 A draw keeps power load low
  • 2-pin connector enables simple voltage control

SXDOOL ADDA 24 V 60 mm case fan

The SXDOOL ADDA AD0624VB-A71GP is a 60 x 60 x 25 mm case fan rated for 24 V and 0.25 A. It uses a two-wire, two-pin connection for power. The unit is supplied new and ready for installation in compatible enclosures.

Suited for 24 V two-pin headers only

This fan fits systems that provide a 24 V two-pin header and have space for a 60 mm frame. Builds that lack a 24 V header or that require a different pin layout cannot use this unit.

24 V 0.25 A two-pin electrical rating

The 24 V 0.25 A rating on the two-pin connector is the specification that decides whether this fan matches the available header. Verify the voltage and pin count before purchase.

Βασικά χαρακτηριστικά

  • 24 V operation suits industrial and server chassis
  • 60 mm square frame fits standard 6025 mounting holes
  • 25 mm thickness matches common slim-fan profiles
  • 25 A draw keeps power load low
  • 2-pin connector enables simple voltage control

Προδιαγραφές

TypeCase Fan

Ερωτήσεις για αυτό το προϊόν

What airflow can I expect from the 0.25 A current draw once the fan is installed?

At 24 V the fan draws 0.25 A, giving roughly 6 W of power; actual airflow depends on the impeller design and system back-pressure, so check the manufacturer’s P–Q curve for the exact CFM value.

Does the 2-pin connector limit speed control compared with a 4-pin PWM header?

The 2-pin lead provides only power and ground, so speed can only be varied by changing the supply voltage; motherboard PWM headers will run the fan at full 24 V unless a voltage reducer or inline controller is used.

Will the 60 mm by 60 mm by 25 mm frame fit a standard 60 mm mounting hole pattern?

Yes, the 60×60 mm square frame with 25 mm thickness matches the common 60 mm fan mounting holes used on many chassis and heatsinks.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.