Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

SXDOOL

SXDOOL DASA0820R2U P002 80mm 12V 4-wire 5P case fan

SKU CH-2YR7-0ZKQW

An 80 mm hydraulic-bearing case fan with a 12 V 4-wire 5-pin connector for targeted chassis cooling

  • TypeCase Fan
  • Fan Size80mm
  • Bearing TypeHydraulic
  • ColorBlack
  • LEDNon-LED
  • 80 mm size fits standard case mounts
  • Hydraulic bearing reduces noise and extends life
  • 12 V DC 0.60 A power draw suits common headers
  • 4-wire 5-pin Dell connector enables PWM control
  • 20 mm depth matches typical 8020 form factor

Product identity

The SXDOOL DASA0820R2U P002 is an 80mm case fan built for 12V systems that require a 4-wire 5-pin DELL connector. It suits technicians replacing a failed OEM cooler in compatible chassis or servers.

Upgrade context

This unit replaces an original AVC DASA0820R2U P002 fan when the same form factor and proprietary plug are mandatory. The jump is worth it only when the existing 8020 hydraulic bearing fan has become noisy or has stopped spinning.

Sustained operation

Hydraulic bearing construction supports continuous running at the rated 0.60A draw without the wear patterns common in sleeve designs. The 80 x 80 x 20mm frame fits the original mounting points so airflow remains steady over long duty cycles.

Βασικά χαρακτηριστικά

  • 80 mm size fits standard case mounts
  • Hydraulic bearing reduces noise and extends life
  • 12 V DC 0.60 A power draw suits common headers
  • 4-wire 5-pin Dell connector enables PWM control
  • 20 mm depth matches typical 8020 form factor

Προδιαγραφές

TypeCase Fan
Fan Size80mm
Bearing TypeHydraulic
ColorBlack
LEDNon-LED

Ερωτήσεις για αυτό το προϊόν

What are the mounting-hole dimensions for the 80mm frame?

The fan measures 80 x 80 x 20mm, matching the standard 80mm mounting pattern used in most cases and server chassis.

How do I connect the 4-wire 5P DELL plug to a standard motherboard header?

Align the keyed 5P DELL connector with the 4-pin PWM header; the extra pin carries Dell-specific telemetry and can remain unused on non-Dell boards.

When should the hydraulic bearing be checked or the fan replaced?

Hydraulic bearings typically run quietly for years; replace the unit if noise increases, RPM drops below spec, or the 0.60A current draw becomes erratic.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.