Thermal Grizzly KryoSheet TG-KS-25-25 25x25x.2mm graphene thermal pad
- KryoSheet graphene…
Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.
Thermal Grizzly
Graphene thermal pad measuring 50 by 50 by .2 mm replaces paste on CPUs, GPUs and consoles with electrically conductive, non-drying performance
Size 50x50x0.2mm
Οι διαγραμμένες εκδόσεις υπάρχουν, αλλά δεν είναι διαθέσιμες εδώ.
The Thermal Grizzly KryoSheet is a graphene thermal pad measuring 50 by 50 by .2 millimetres. It serves as a high-performance alternative to traditional thermal paste on processors and graphics cards. The material contains no liquid components so it cannot dry out or degrade over time. Its conformable surface ensures consistent contact across uneven surfaces.
KryoSheet pads are electrically conductive, which restricts where they can be applied safely. They must not bridge exposed circuitry or contact sensitive components on the board. Installation requires careful alignment and adherence to the supplied instructions to prevent short circuits. This constraint makes them unsuitable for inexperienced builders or tight clearances without insulation.
The pad replaces thermal compound on CPUs, GPUs and console processors such as those in the PS4, PS5 and Xbox. It is worth choosing when a long-lasting, mess-free solution is preferred over repeated paste reapplications. The jump is most valuable for users who service hardware regularly or need consistent conductivity without pump-out or drying issues.
| Brand | Thermal Grizzly |
|---|---|
| Model | TG-KS-50-50 |
| Part Number | TG-KS-50-50 |
| Features | KryoSheet graphene thermal pads are an excellent alternative for thermal pastes and have a conformable surface with very high thermal conductivity. Compared to Carbonaut pads, KryoSheet offers significantly higher thermal conductivity. |
Άλλες εκδόσεις αυτού του μοντέλου
Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.
This pad measures 50 by 50 millimetres with a .2 millimetre thickness, so pick it when your die or heat-spreader fits within that footprint and you need a thin, compliant layer.
The graphene structure conducts heat through the .2 millimetre layer immediately, eliminating pump-out and dry-out issues common with paste while keeping temperatures stable under sustained loads.
Because the graphene material conducts electricity, you must keep the pad clear of exposed PCB traces, solder points or component leads to prevent short circuits.
Επίσης σε αυτό το ράφι
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Το νόμισμα στο οποίο πληρώνετε, και αυτό στο οποίο βλέπετε τις τιμές.
Αποστέλλεται από το πορτοφόλι σας στο ταμείο
Μόνο για προβολή — ο κατάλογος αναγράφεται σε δολάρια
Κανένα νόμισμα δεν αντιστοιχεί.
Επιλέξτε τη γλώσσα στην οποία σας μιλάει ο ιστότοπος.
Καμία γλώσσα δεν ταιριάζει.
Πρώτη επίσκεψη;
Έχετε ήδη λογαριασμό;
Δεν υπάρχει αυτόματη επαναφορά κωδικού: αυτό το κατάστημα δεν στέλνει e-mail, άρα δεν υπάρχει σύνδεσμος μίας χρήσης να ζητήσετε. Αφήστε τη διεύθυνση στον λογαριασμό σας και κάποιος θα την επεξεργαστεί με το χέρι.
Το αίτημα καταχωρίστηκε
Δεν θα λάβετε τίποτα στα εισερχόμενά σας — το κατάστημα δεν στέλνει κανένα e-mail. Κάποιος το διαχειρίζεται με το χέρι.
Τον θυμηθήκατε;