Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Thermal Grizzly TG Putty Basic 100 g tub with spatulas

Thermal Grizzly

Thermal Grizzly TG Putty Basic 100 g thermal paste

SKU CH-YTN1-JVYPN

Electrically non-conductive thermal putty replaces traditional pads on GPUs, compensating for height differences from .2 mm to 3.0 mm with medium thermal conductivity

  • Specifications100 grams
  • FeaturesThermal Grizzly Putty is an electrically non-conductive alte

Version Basic

  • Electrically non-conductive putty eliminates short-circuit risk on GPU components
  • Flexible gap filler bridges height differences from .2 mm to 3.0 mm for consistent thermal contact
  • Replaces multiple thermal pad thicknesses in a single application on graphics cards
  • Includes spatulas for easy, large-area application without specialised tools
  • 100 g container covers large GPUs such as RTX 4090 front and backside memory and VRM

Electrically non-conductive gap filler

Thermal Grizzly TG Putty Basic is a 100 gram thermal compound designed to replace traditional thermal pads during GPU modifications. Its electrically non-conductive formula prevents short circuits while filling uneven gaps between components and coolers. The putty consistency allows manual shaping or spatula application for precise coverage across varied surface heights. It suits builders converting air-cooled cards to water blocks or refreshing aged factory pads.

Height-range limits of 0.2 to 3.0 mm

The material compensates for component-to-cooler gaps ranging from 0.2 mm to 3.0 mm, covering most memory and voltage-regulator stacks on modern graphics cards. Gaps thinner than 0.2 mm may not retain enough putty for stable contact, while gaps exceeding 3.0 mm fall outside the tested compression range. The included spatulas help spread an even layer across large areas, but the putty cannot bridge missing standoffs or damaged mounting hardware. Users must verify actual stack heights before application.

100 gram capacity covers large cards

One 100 gram container provides enough material for multiple GPU projects or a single large card such as an RTX 4090 front and back side. A smaller card like a GTX 1060 typically needs only about 30 grams for a full repad. The Basic variant offers medium thermal conductivity, so it handles typical VRAM and VRM loads but may saturate under extreme overclocking heat. Builders seeking lower junction temperatures on high-power designs should consider the higher-conductivity Advance or Pro variants instead.

Βασικά χαρακτηριστικά

  • Electrically non-conductive putty eliminates short-circuit risk on GPU components
  • Flexible gap filler bridges height differences from .2 mm to 3.0 mm for consistent thermal contact
  • Replaces multiple thermal pad thicknesses in a single application on graphics cards
  • Includes spatulas for easy, large-area application without specialised tools
  • 100 g container covers large GPUs such as RTX 4090 front and backside memory and VRM

Προδιαγραφές

BrandThermal Grizzly
ModelTG-P-B-100-R
Part NumberTG-P-B-100-R
Specifications100 grams
FeaturesThermal Grizzly Putty is an electrically non-conductive alternative to traditional thermal pads, specifically designed for GPU modifications and the replacement of thermal pads between the PCB and the cooler.

Άλλες εκδόσεις αυτού του μοντέλου

1 ακόμη στην ίδια σειρά

Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.

Ερωτήσεις για αυτό το προϊόν

Which TG Putty variant should I choose for a standard GPU pad replacement?

TG Putty Basic provides medium thermal conductivity and is suited for general GPU modifications where extreme conductivity is not required.

How does the medium conductivity of TG Putty Basic perform once applied between GPU components and the cooler?

It effectively bridges height differences from .2 mm to 3.0 mm, ensuring consistent thermal contact across memory and voltage regulators.

What gap range does this electrically non-conductive putty cover in practice?

The putty compensates for height differences ranging from .2 mm to 3.0 mm, replacing multiple pad thicknesses with one material.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.