Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Black mini-tower case plastic finish compact form

UTLGAMENG

UTLGAMENG F2 Mini-Tower PC Case

SKU CH-CP7Y-CBRB7

A compact mini-tower that fits Micro ATX and ITX boards up to 24.5 × 24.5 cm, takes a 1U or Flex PSU, one 3.5-inch drive or two 2.5-inch drives, low-profile graphics cards.

  • Typemini_tower
  • Case MaterialPlastic
  • With Power SupplyNo
  • Power SupplyMicro ATX
  • Motherboard CompatibilityMicro ATX
  • Side PanelPlastic
  • Compact mini-tower saves desk space while fitting Micro ATX and ITX boards up to 24.5 x 24.5 cm
  • CPU cooler clearance of 70 mm drops to 40 mm when a hard drive is installed
  • Accepts 1U or FLEX power supplies measuring 150 x 81.5 x 40.5 mm
  • Low-profile graphics cards only, ensuring compatibility with the slim chassis
  • Front I/O includes USB 3.0, two USB 2.0 ports and audio jacks

Mini-Tower Chassis for Micro ATX Builds

This compact mini-tower accepts Micro ATX and ITX motherboards up to 24.5 by 24.5 centimetres. It is aimed at business users who need a small desktop footprint without sacrificing standard board compatibility. The case weighs 4.95 pounds and measures 13.89 by 13.62 by 5.63 inches.

Thermals, Noise and Power Draw

Air cooling is the only supported method. A CPU cooler up to 70 millimetres tall fits when no hard drive is installed; with a drive fitted the limit drops to 40 millimetres. The chassis takes a 1U or FLEX power supply sized 150 by 81.5 by 40.5 millimetres. No fans are included.

Build Integration and Clearances

Only low-profile graphics cards with low bezels are supported. Storage options include one hard drive or two solid-state drives. The I/O panel provides one USB 3.0 port, two USB 2.0 ports and audio jacks. Side panels and structure are plastic with SECC electrolytic sheet shielding.

Βασικά χαρακτηριστικά

  • Compact mini-tower saves desk space while fitting Micro ATX and ITX boards up to 24.5 x 24.5 cm
  • CPU cooler clearance of 70 mm drops to 40 mm when a hard drive is installed
  • Accepts 1U or FLEX power supplies measuring 150 x 81.5 x 40.5 mm
  • Low-profile graphics cards only, ensuring compatibility with the slim chassis
  • Front I/O includes USB 3.0, two USB 2.0 ports and audio jacks

Προδιαγραφές

BrandUTLGAMENG
Typemini_tower
Case MaterialPlastic
With Power SupplyNo
Power SupplyMicro ATX
Motherboard CompatibilityMicro ATX
Side PanelPlastic
Hot-Swap Drive Bays0
80mm FansNo
Max GPU LengthMicro ATX
Max CPU Cooler HeightMicro ATX

Ερωτήσεις για αυτό το προϊόν

How do I install the motherboard and which orientation catches people out?

Fit the Micro ATX board so its rear I/O aligns with the cut-out; the 24.5 × 24.5 cm limit means boards wider than that will foul the side panel even if the screw holes line up.

What will need replacing or cleaning after a year of use?

The plastic side panel and front filter collect dust quickly; remove the panel and vacuum the intake mesh every few months to keep airflow to the low-profile GPU and 1U or FLEX PSU.

What is the first thermal limit hit during a long render?

CPU cooler height is capped at 70 mm, or 40 mm if a 3.5″ HDD is fitted; exceeding either chokes airflow and forces the processor to throttle.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.