NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.
Vetroo
ATX mid-tower case with 270° tempered glass, pre-installed 4 PWM FDB ARGB fans, 360 mm radiator support, 410 mm GPU clearance and USB 3.0 Type-C I/O
The Vetroo AL900 is a pink ATX mid-tower case built for builders who want a wide, panoramic view of their internal components and RGB lighting. Its 270° full-view tempered glass design showcases the entire chassis architecture from multiple angles. The innovative YTX interior layout supports hidden-connector motherboards for cleaner cable management. It suits enthusiasts building a showpiece system with high-end graphics cards.
The case accommodates up to a 360mm liquid cooling radiator in the top panel and supports a maximum GPU length of 410mm, fitting all current RTX 40 series cards. It holds up to 10 x 120mm fans for extensive airflow configurations. ATX, M-ATX and YTX motherboards are supported alongside power supplies up to 200mm in length. Builders needing more than 10 fan mounts or radiators larger than 360mm will find the internal space insufficient.
Four pre-installed 120mm PWM FDB ARGB fans and a dedicated controller with remote are included, providing immediate cooling and lighting control. The I/O panel features a high-speed USB Type-C port rated for 10Gbps transmission alongside a USB 3.0 port. This package replaces a separate fan and controller purchase for a standard ATX build. Users requiring more than one Type-C port or legacy 5.25-inch drive bays should look elsewhere.
| Type | ATX Mid Tower |
|---|
The case supports ATX, M-ATX and YTX boards and accepts a 360 mm radiator in the top, so your existing parts will mount without modification.
Connect the controller, power on, and use the remote to cycle colours and fan speeds; all four PWM FDB fans should spin and light in sync.
The package includes the case, four ARGB PWM fans with controller and remote, a full screw accessory kit and the manual; no additional hardware is required for a standard build.
Επίσης σε αυτό το ράφι
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Το νόμισμα στο οποίο πληρώνετε, και αυτό στο οποίο βλέπετε τις τιμές.
Αποστέλλεται από το πορτοφόλι σας στο ταμείο
Μόνο για προβολή — ο κατάλογος αναγράφεται σε δολάρια
Κανένα νόμισμα δεν αντιστοιχεί.
Επιλέξτε τη γλώσσα στην οποία σας μιλάει ο ιστότοπος.
Πρώτη επίσκεψη;
Έχετε ήδη λογαριασμό;
Δεν υπάρχει αυτόματη επαναφορά κωδικού: αυτό το κατάστημα δεν στέλνει e-mail, άρα δεν υπάρχει σύνδεσμος μίας χρήσης να ζητήσετε. Αφήστε τη διεύθυνση στον λογαριασμό σας και κάποιος θα την επεξεργαστεί με το χέρι.
Το αίτημα καταχωρίστηκε
Δεν θα λάβετε τίποτα στα εισερχόμενά σας — το κατάστημα δεν στέλνει κανένα e-mail. Κάποιος το διαχειρίζεται με το χέρι.
Τον θυμηθήκατε;