Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
A 15x15in swing-away heat press with digital display, curved cap press, mug press and two plate presses, dark metal finish

VEVOR

VEVOR 15x15in Swing-Away 5-in-1 Heat Press 1000W 110V 3D Printers Accessories

SKU CH-7T6V-179MM

A 15 x 15 in swing-away heat press with digital control, dual-tube heating and five interchangeable platens for shirts, caps, mugs and plates up to 10 in diameter

  • TypeOther Appliances
  • Digital dual-screen control for precise temperature and time setting
  • Dual-tube heating keeps centre-to-edge difference around 5 °C
  • 360° swing-away arm applies even pressure and moves heat aside
  • Insulated surfaces stay 50–70 °C while platen reaches 210 °C
  • Five interchangeable platens cover shirts, caps, mugs and two plate sizes

15x15in Swing-Away 5-in-1 Heat Press

This heat press delivers 1000W at 110V for sublimation transfers up to 15x15in. The swing-away arm applies even pressure across the platen and moves the heating element aside for safety. Five interchangeable attachments handle flat garments, curved caps, mugs from 3in to 3.5in diameter, and plates up to 8in or 10in.

Check voltage, bench space and plug type

The unit runs on 110V at 60Hz with a 1.5m power cord, so confirm your outlet matches before ordering. Assembled dimensions are 51x40x47cm, requiring a stable, heat-resistant surface with clearance for the 360° swing motion. Maximum temperature reaches 210°C or 410°F, so ensure your materials and workspace tolerate that heat range.

Dual-tube heating and insulated housing

Double-tube heating limits the centre-to-edge temperature difference to about 5°C for consistent results. Two-layer insulation keeps the outer surface at roughly 50-70°C when the platen is at working temperature. The digital controller shows dual readouts with silicone buttons for °C/°F switching. Package includes cap, mug, two plate presses, removable silicone and cotton pads, cord and manual.

Βασικά χαρακτηριστικά

  • Digital dual-screen control for precise temperature and time setting
  • Dual-tube heating keeps centre-to-edge difference around 5 °C
  • 360° swing-away arm applies even pressure and moves heat aside
  • Insulated surfaces stay 50–70 °C while platen reaches 210 °C
  • Five interchangeable platens cover shirts, caps, mugs and two plate sizes

Προδιαγραφές

TypeOther Appliances

Ερωτήσεις για αυτό το προϊόν

What accessories are included in the box and what must be bought separately?

The box contains the fully assembled heat press machine for T-shirts, a cap press, a mug press, two plate presses, a power cord, an operating manual, a removable silicone pad and a cotton pad. Shirts, cups and hats are not included.

Which plate press size should I choose for my project?

Two plate presses are supplied: one handles plates up to 8 inches in diameter and the other up to 10 inches. Select the size that matches the plate you intend to customise.

How even is the heat across the 15 x 15 inch platen when it reaches 210 °C?

Dual-tube heating keeps the temperature difference between the centre and the edge to about 5 °C, so the 38 x 38 cm transfer area heats uniformly at the maximum 210 °C setting.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.