Vszerda
Vszerda SY-PEX24076 2.5 Gbps PCIe network card
Adds a 2.5 Gbps RJ45 Ethernet port over a PCIe x1 slot using the Intel I225 controller with TSN, RSS and 9.5 KB jumbo frames
- Speed2.5 gigabits_per_second
- Interfacepci_express_x1
- BUSpci_express_x1
- FeaturesDesktop
- Dimensions1.0 in x 5.5 in x 4.0 in
- Weight0.1763698096 lb
- 5 Gbps Ethernet for faster wired transfers
- Intel I225 chipset offloads checksum and segmentation tasks
- PCI Express x1 slot fits most desktop motherboards
- Low-profile bracket included for slim chassis builds
- TSN and Jumbo Frame support for time-sensitive applications
2.5 Gbps PCIe Network Card
The Vszerda SY-PEX24076 adds a single 2.5 Gigabit Ethernet port to a desktop through a PCI Express x1 slot. It uses the Intel I225 controller for multi-gigabit copper networking up to 2.5 Gbps. The card includes a low-profile bracket for small-form-factor chassis. Driver media is supplied in the box.
PCI Express x1 Interface
The card requires an available PCI Express x1 slot and is not compatible with legacy PCI slots. It negotiates speeds of 10, 100, 1000 and 2500 Mbps over standard RJ45 cabling. The Intel I225 chipset handles checksum offload, TCP segmentation and Jumbo Frames up to 9.5 KB. Advanced interrupt handling reduces CPU overhead on multi-core systems.
Desktop Expansion with Low-Profile Fit
Measuring 1.0 by 5.5 by 4.0 inches, the board fits tight builds when the included 8 cm bracket is fitted. Time Sensitive Networking features such as IEEE 802.1AS-REV and 802.1Qbv are supported on select operating systems. The single-port design suits users adding one high-speed wired link. Builders needing multiple ports or fibre connectivity should look elsewhere.
Βασικά χαρακτηριστικά
- 5 Gbps Ethernet for faster wired transfers
- Intel I225 chipset offloads checksum and segmentation tasks
- PCI Express x1 slot fits most desktop motherboards
- Low-profile bracket included for slim chassis builds
- TSN and Jumbo Frame support for time-sensitive applications
Προδιαγραφές
| Brand | IO Crest |
|---|---|
| Model | SY-PEX24076 |
| Part Number | SY-PEX24076 |
| Speed | 2.5 gigabits_per_second |
| Interface | pci_express_x1 |
| BUS | pci_express_x1 |
| Features | Desktop |
| Dimensions | 1.0 in x 5.5 in x 4.0 in |
| Weight | 0.1763698096 lb |
Ερωτήσεις για αυτό το προϊόν
What does 2.5 Gbps mean for actual file-transfer speed on this card?
The card negotiates 2.5 Gbps over standard copper cabling, so sustained throughput is limited by the 2.5 Gbps line rate and system overhead rather than a higher ceiling.
Which PCIe generation and lane width does the SY-PEX24076 use, and what bandwidth does that provide?
It uses a PCI Express x1 link; the slot generation of the motherboard determines the lane speed, and the single lane carries the 2.5 Gbps Ethernet traffic without saturation.
Will the low-profile bracket let this card fit in a slim 1U chassis?
The bundle includes an 8 cm low-profile bracket, and the board measures 1.0 in by 5.5 in, dimensions that match typical half-height, half-length slots in 1U systems.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
NVIDIA ConnectX-7 MCX75343AMS-NEAC 400GbE network card
- InfiniBand: NDR/NDR…
- Single-port OSFP In…



